- 1010322S Main Long. Beams - table edge carrying x-rails
- 1010302S Cross Support Beams under table top
- Umbilical Plate Purpose/Role
- Table legs for storing sheets underneath
- Vacuum Hold Down Systems
- Possibility of making a partly bolted table for transport
- Mounting 4th axis rotating indexers or lathes under the gantry
- Space-saving vertical table
- Screwing the table top to the cross support beams
- 1010123 Support Board - material selection (MDF, plywood, other . .)
- Wood base table option
- Alternative metal table - mostly from 3x1.5" channel
- Aluminum vs. Steel
- Steel Channel Labeling (US)
- Mis-placed X-rail - what to do now?
- General Table Question
- Y axis sag
- Newby question re driving one side
- Converting Base Table For Plasma Cutting
- All acrylic gate valve for the vacuum hold down
- Fastening the racks to the underside of the rails
- Weight of Table, Gantry, Y Car and Z Slide
- Moving the beast around the shop - wheels, etc.
- 10 10 302 S - Maximum spacing of cross bearers
- Basic theory of vacuum holddown & pumps
- Holding smaller parts on table
- Why the gap between the support/spoil board and beams?
- 10 10 300 W "CRITICAL" note?
- For those who go with mitered tubes - this might help
- Support / Spoil board sizing
- Steel sizes & gauge substitute info! (can we make it lighter and cheaper?)
- maximum tabel size ?
- Isolate Vibration?
- MechMate Gantry on a Moving X Table?
- Adjustable and/or isolating feet under table legs?
- Side Raisers instead of a Base Table
- Getting rails coplaner and straight
- Problems with square washers (also called taper or bevel washers)
- Foul between diagonal brace and tip of cross-support channel
- Bolt only - no weld?
- Problem with Main Longitudinal Beam
- Various Y-dimensions - a schematic guide
- C Channel of Cross Bearings not square
- Re-alignment after dis-assembly - getting all parts into position at the new location
- Possible way to get recycled steel?
- Dovetail Jig - must the table be extended?
- Hockey puck leveling feet.
- End boring shelves etc.
- Fixing the spoilboard to the support board
- Plasma Build questions
- 10 10 300 D What is Dimension "M"
- Choice of support board materials
- Legs - their purpose and sizing (Can legs be bolted......?)
- Potential problems with placing diagonal braces
- What tool to use?
- gauge bar suggestion
- Main Beam - Structural Channel vs Ship Channel
- What is the purpose of a spoil board or bleeder board?
- Surfacing the table
- Base table out off square
- Structural design of an Indexer Valley
- A fourth axis attachment concept
- Rectangular tube instead of C Channel
- What is the optimal table height for ease of use and safety?
- Rail grinding
- Space use and Shopbot table designs
- Table: Adjustable/Lift Design
- Longitudinal beam options for 350mm Z-axis
- Just getting started.. couple questions...
- Welding legs onto BIG longitudinal beams
- Attach the cross bearers first or attach support board first?
- Can the X,Y zero be moved from right to left front?
- flattening the pipe ends
- Using Sanding Pads instead of Sanding Disks for rail construction
- X Rail I beam thickness??
- Screw M7
- Sacrificial wood on base frame?
- Vacuum Table....
- My 4th axis
- 4th Axis from china
- Cut list ...
- Whichprecise location of the coast(ribs) of crossbars Y to compared with 2 giders X
- x & Y rails from stainless steel????
- Removable Base Table
- Will my legs be strong enough
- 10 10 302 S Location Alteration
- what type of bleeder board to use?
- Table size for 49"x24" net cut area.
- a solution for gaining 10 cm more space on the z axis
- Welding.
- Good Base Table build video on Youtube
- Is the Main longitudinal beam Taper Flange or Parallel Flange Channel
- Alternative idea for the machine base
- I beams for x rails?
- Bowed I Beam!!