|
|
#1
Tue 16 June 2009, 14:12
|
|||
|
|||
|
gauge bar suggestion
10 20 235 shows the clamp strips cut at "Y+450mm".
10 10 300 shows a gauge rod cut at "Y+461mm". Seems to me that the clamp strips, if cut 11mm longer, would work nicely as gauge rods. 
|
|
#2
Tue 16 June 2009, 21:01
|
|||
|
|||
|
Good thinking.
|
|
#3
Wed 17 June 2009, 05:34
|
|||
|
|||
|
Thanks for the tip...thanks for sharing
|
 |
|
|
