Bill of Materials? X-Rail Specification?

[AlphaBob]

Sorry, I'm sure that I'm missing it, but I can't find a bill of materials. Specifically, I'm trying to locate the specification for the X-Rail.

I've checked:

10 10 200 X-Rail Assembly
10 10 220 ALU / V-CAP X-RAIL ASSEMBLY
10 10 240
10 10 241
etc.

And, I've been through the index "MechMate Mamba Drawing Index".

I'm sure that I'm missing it, but can anyone point me in the right direction?

Thanks,

[Robert M]

Have a look at page 107 ( M1 10 110) for your rail question / needs. Theirs been a note to lengthen the extra length from 200 to 350mm in provision for the grinder skate ( M6 10 100). This as been address in this thread (http://www.mechmate.com/forums/showthread.php?p=11117&postcount=44)(post 41 to 44 )
Remember, everything with dimension is in relation with your basic cutting table size ! See this thread ! (http://www.mechmate.com/forums/showthread.php?p=917&postcount=1)

Hope this help your question & address other issue as well !
Amicalement, Robert ! ;)

[AlphaBob]

Thanks Robert - just the reference I was hoping for! 1/4" X 2 1/2" X 2" - pretty heavy stuff - no wonder the machine has a reputation for being so stout!

I'll probably try to rip the material with my hand-held metal cutting circular saw (Porter Cable) and then true up the edge on the mill.

Thanks again for the quick response!