Art
Sun 17 October 2010, 13:35
I am planing my next build for a machine aimed at doing carvings. After 3 or 4 years looking at everything I could find I still think that the MM design is the best. Started determined to build a 4by4 because of shop space but after looking at moving things around I can get a 4by8 in the shop.
While cost is not a limiting factor it is a consideration factor. The electronics and motors will be the same for both so the diference in cost will only be metal which I suspect will be less than $500. Anyone that kept at least fairly accurate price of materials please post them, year bought and location. I estamate the cost of my indexer at 6K but there was a fair amount of rework after I found the MM site and this was 3 years ago so I am not sure the cost guess is accurate.
While cost is not a limiting factor it is a consideration factor. The electronics and motors will be the same for both so the diference in cost will only be metal which I suspect will be less than $500. Anyone that kept at least fairly accurate price of materials please post them, year bought and location. I estamate the cost of my indexer at 6K but there was a fair amount of rework after I found the MM site and this was 3 years ago so I am not sure the cost guess is accurate.