Z zero setter REALLY fantastic

[Art]

At http://cnczone.com/forums/showthread.php?t=100594 . It is an addon to the Mach Blue screen set. Short version. At boot up do a reference all. Using the movable puck tool is zeroed to material. From now to machine power down the tool is zeroed using fixed touch off.

[danilom]

It's a great info! Works really well in the video, it will be the first thing to setup when my machine starts moving.

Thank you!

[Robert M]

Hey, hi Art….
Great to see your still around and active member !!
Thanks for sharing this, not all are updated with this or see all what’s up on the CNCzone!
I too will be installing this when time comes….seems like a BIG +
Amicalement, Robert ;)

[dragonfinder1]

I've been using it for some time and love it. Also I use the laser zeroing tool for the "x" "y" axis as well.

http://www.cnczone.com/forums/showthread.php?t=48752

[Johannescnc]

Ditto! It works great!:D

[Art]

Finished up the JoeCNC Hybrid and it is a nice low use machine. Next project will be a 4by4 80 watt laser. helping devolop a DIY kit. Part of that will be to build another MM which I hope will be a 4by4 but will see if I really need a 4by8. Hybrid just won't hold up to the alumnium cutting that I will need. Will be great to be able to mill my own parts as planning of using a lot of PVC and alumnium in the MM. So much good information out there!