Laser Cut Parts from Ontario, Canada - Page 3

HomeMadeCnc · #61 Sat 29 November 2008, 17:53

Hi Heath, thanks for the parts. All arrived fine.
Tim

RonH100 · #62 Tue 09 December 2008, 08:26

Hi Heath, I'd be interested in a set.

Ron

domino11 · #63 Tue 13 January 2009, 19:35

I will have a couple of extra sets of parts available for anyone sitting on the fence. They should be ready is a few weeks. Let me know if you are interested as first come first served.

astrolavista · #64 Thu 15 January 2009, 20:16

Quote:

Originally Posted by domino11

Anyone else sitting on the fence for laser cut parts in Canada? Let me know as I am quoting for a new batch now. I dont have funds to keep lots of stock so let me know.

Sent a PM

astrolavista · #65 Wed 21 January 2009, 12:31

Hi Heath,
Did you get my Second PM? With my addr and such?

domino11 · #66 Wed 21 January 2009, 15:02

Rene,
Sorry for the delay. Check your inbox!

xnaron · #67 Thu 05 February 2009, 16:45

Quote:

Originally Posted by domino11

I will have a couple of extra sets of parts available for anyone sitting on the fence. They should be ready is a few weeks. Let me know if you are interested as first come first served.

Hi,

How much for the set and do you have any idea what shipping to Edmonton would cost?

thanks!

Brendin

sudjake · #68 Wed 25 February 2009, 19:13

If your still looking at selling a kit I could be intersted.
Maybe someone could give me a hint as to where to find some of the other parts.

sailfl · #69 Thu 26 February 2009, 01:59

Jacob,

I don't know if they ship to that far North but FactoryMation and Automation Direct.

RonH100 · #70 Thu 12 March 2009, 17:20

Just a little public thanks to Heath (domino11), got the parts today, very well packed, they looked great!

Thanks,
Ron

domino11 · #71 Thu 12 March 2009, 20:06

Ron,
Glad you like the parts.

If anyone else is on the fence, there is one set left from this batch ready to go.

astrolavista · #72 Tue 17 March 2009, 11:03

Hi Heath

I also received my parts, they are top knotch.. can hardly wait to get them "attached"

Thanks again..
R

domino11 · #73 Tue 17 March 2009, 11:16

Rene,
Glad to hear you liked the parts.

I really like to see the machines being built with my parts!

Good luck.

gaby · #74 Sun 12 April 2009, 19:58

Hi! I be new in this forum. If you have pre cut part for sale, let me know. (Quebec Canada) . Thank Gaby

domino11 · #75 Sun 12 April 2009, 20:29

PM sent

the_affliction · #76 Wed 08 July 2009, 19:23

Actually got them awhile ago and forgot to post my thoughts. The parts were very well packed and arrived in a timely fashion. Thanks so much Heath great price and also very well informed in the art of cnc it was great to get some advice for my build from him. I still have the parts sitting in my garage along with some other steel. I am slowly collecting the bits and I am hoping to build by the end of 09. Then you'll get to see the parts in action!

Thanks again

domino11 · #77 Wed 08 July 2009, 19:37

Kelsey,
Glad you liked the parts. Hope to see your build coming then. Its great to see guys building their machines with parts I got cut for them.

Good Luck,

If anyone else is on the fence in Canada, I have a new batch coming back from the bender shortly.

domino11 · #78 Thu 05 November 2009, 21:22

I still have 5 sets of parts available for anyone who is interested.

digger · #79 Fri 06 November 2009, 07:04

Heath,

is there a chance to get a set for grinding. My laset cut parts didn't include them - they are from first batch, for Mechmate not Mamba..

Milosh

domino11 · #80 Fri 06 November 2009, 09:13

Milosh,
If you mean just the grinding skate parts, let me see what I have in my pile at home. Will get you a pm this weekend.

cleyte · #81 Tue 17 November 2009, 09:38

Hi Heath (Domino11),

I live in Newfoundland and about to start my first build. I have sent you a PM regarding the purchase of the laser cut parts.

Fogo

domino11 · #82 Tue 17 November 2009, 13:00

Fogo I sent you an email.

For pics look HERE

cld · #83 Mon 28 December 2009, 17:53

hi heath
i'm newbie in CNC machine and took a decision for 2010

, it was a motorbike

or a cnc

, and the winner will be in for 2010 the Gerald best idea : the Mechmate

but as i saw, the bigest problem is to find the laser cut parts
and apparently, you are the best dealer for the canada

When do you program the next batch for 2010? if you program one

if you are ok, i will put my name on the list for the next production
let me know what do you think,
thanks

domino11 · #84 Mon 28 December 2009, 18:05

CLD,
I still have two sets left, I will send you a pm.

miguel juan · #85 Tue 04 May 2010, 19:16

I have only just joined and would be interested in buying the Laser cut parts from someone in Canada. Having read all the previous posts in this section, I fear I have arrived a little late. Any suggestions on a shop that has done this kind of work previously and would be willing to do a single set?

domino11 · #86 Thu 06 May 2010, 07:14

Sent you a PM Mike.

domino11 · #87 Mon 20 September 2010, 16:19

Sets still available for the Canadian guys.

wolfy15 · #88 Sun 11 March 2012, 11:49

Hi do you know if we can order a kit
thank
Wolfy15
Ghislain

domino11 · #89 Sun 11 March 2012, 20:59

PM Sent

subkid · #90 Sat 28 April 2012, 21:24

what you still have available.

I'm in Hawkesbury.

PM me? Maybe we can talk by phone?