|
|
#31
Fri 24 October 2008, 18:39
|
|||
|
|||
|
Conrado,
I just sent you an email with all the details. Glad to have you on board. Joe 
|
|
#32
Fri 24 October 2008, 19:53
|
|||
|
|||
|
Quote:
|
|
#33
Sat 25 October 2008, 09:01
|
|||
|
|||
|
Thank you Joe
I`m glad to be here I dont recive your email yet confirm my email [email protected] or [email protected]
|
|
#34
Sat 25 October 2008, 13:17
|
|||
|
|||
|
Hector
The mamba parts should be good.
|
|
#35
Sat 25 October 2008, 16:21
|
|||
|
|||
|
The parts are all basicly the same. The Main Car Plate has a small tab that is a mount for a e-stop box.
I also added four 1/4inch washers for the feet and a beefier box to ship everything in. I peronaly am using The Classic Version, because I purched it a few years ago and I couldn't waste it. Good luck with your build. Joe
|
|
#36
Mon 27 October 2008, 16:58
|
|||
|
|||
|
Quote:
I did not recive the mail could you please re-send it please  ?I`ll apreciatte it Best Regards Conrad
|
|
#37
Mon 27 October 2008, 20:58
|
|||
|
|||
|
Conrado,
I just sent you a Email. Let me know if you don't get it. Joe
|
|
#38
Sat 15 November 2008, 11:13
|
|||
|
|||
|
Laser Cut Parts
I am picking up another set of parts from the Laser/ Fabricators on Monday!
 I have about three extra sets available if anyone is ready for them. They are $448.00 plus shipping. If you want a set, email or PM me your complete shipping address so I can see what shipping is to you. Joe [email protected]
|
|
#39
Wed 19 November 2008, 18:41
|
|||
|
|||
|
Here we go !!
Well went by and met Joe. Had a great visit and I am sure we will chat a lot in the future !! I now have my first pile of MM parts.. So I am in for sure. I am on to sourcing some of the steel through my local channels !! Great to meet you Joe !!!
|
|
#40
Thu 20 November 2008, 03:27
|
|||
|
|||
|
Got my Mamba parts from Joe yesterday. The fit and finish is outstanding. I am gathering parts for upgrading a PR 96 Shopbot machine.
|
|
#41
Fri 21 November 2008, 18:46
|
|||
|
|||
|
J.R.'s Leg Levelers
Since I saw J.R.'s Leg Levelers I knew I had to have/make them. And I did!
I have included four 3" round disk in last 20 sets I've sent out. The Manufacture of the rubber part has agreed to sell them to me for about (parts$ + shipping$ =) $1.50 each. I ordered 120 pieces so let me know if you are interested. Joe
|
|
#42
Sat 22 November 2008, 21:52
|
|||
|
|||
|
Hi Joe,
Got my parts a couple days ago....love'em. Very well made. I wondered what the disks were for, thought they might be feet. I am interested in the rubber parts to complete the feet....$1.50ea is reasonable. Wayne
|
|
#43
Sun 23 November 2008, 06:39
|
|||
|
|||
|
Joe I thought about making the hole in the 3" disk so it could be threaded. This would eliminate the nut and allow it to bottom out much nicer on the leg.
I used a Forster bit and increased the depth of the recess in the rubber foot maybe 1/8" so the head of the bolt couldn't bottom out over time. When I had the machine all level, I went back and measured the gap between the disk and the leg and cut pieces of 3/4" ID water pipe and installed them to make it stronger. The 1/2" bolt alone looked a little dinky to me. A link for more detail http://www.mechmate.com/forums/showt...9&postcount=81
|
|
#44
Sun 23 November 2008, 18:50
|
|||
|
|||
|
JR,
What if you used a Grade 5 or Grade 8 bolt? Wouldnt that be strong enough? Gerald what are your thoughts on the bolt strength?
|
|
#45
Mon 24 November 2008, 23:03
|
|||
|
|||
|
I need some laser cut parts for one MechMate.
Robert Turner El Paso, Texas 79936 I'm also looking to buy any other parts and components used in building a MechMate.
|
|
#46
Tue 25 November 2008, 10:59
|
|||
|
|||
|
Robert, I just sent you a P.M.
|
|
#47
Wed 03 December 2008, 16:40
|
|||
|
|||
|
Laser Cut Parts
Currently I have 8 sets of parts that are ready to go.
 If you are interested in a set? $454.00 plus Shipping. Shoot me a email at [email protected] with all your shipping info. so I can calculate shipping to you. Thanks Joe
|
|
#48
Wed 03 December 2008, 17:27
|
|||
|
|||
|
Hey Joe, if you don't mind sharing, how many sets of parts have passed through you? You must be responsible for a few dozen machines by now?
|
|
#49
Wed 03 December 2008, 18:57
|
|||
|
|||
|
Laser Cut Parts
I think its somewhere in the neighborhood of 50 sets. I am enjoying seeing peoples machines in the process of being made.
My build is going slowwwww. Golf is getting in my way, its the Alabama weather. I'm glad to help and Keep up the good work. Joe
|
|
#50
Fri 05 December 2008, 19:16
|
|||
|
|||
|
My set arrived today:
http://www.mechmate.com/forums/showt...9&postcount=63
|
|
#51
Fri 05 December 2008, 20:02
|
|||
|
|||
thank you
Hi Joe
I recived my parts today, thank you
|
|
#52
Sun 21 December 2008, 00:51
|
|||
|
|||
|
Hi Joe, I am not sure if I properly understand how the skate goes together. The two holes in M610116PB for the 1/2" height adjustment bolts seem to be laser cut at 1/2" diameter, which means they can't be tapped. Is there something I'm missing? Thanks.
|
|
#53
Sun 21 December 2008, 01:20
|
|||
|
|||
|
Travis,
Check your drawing package. There is a set of drawings that cover the parts for grinding assembly.
|
|
#54
Sun 21 December 2008, 01:32
|
|||
|
|||
|
I have checked the .dxf. Those holes should be 9mm. From Travis's photo they are clearly much bigger.
A thin nut under the skate could be the fix.
|
|
#55
Sun 21 December 2008, 02:55
|
|||
|
|||
|
Joe,
Soon you will have to include key chains and pecan nuts with your orders! (That is a Southern thing - the nuts)
|
|
#56
Sun 21 December 2008, 07:09
|
|||
|
|||
|
Yea, J.R. had me change that for him and my laser guy changed that on the master cut list.
I'll get that fixed on the next batch of parts I get cut. I am still sitting on about 5 sets to sell if anyone wants to buy them selfs a Christmas present.? The nuts idea (lol)sounds great, but the box weighs 65 pounds and that would be pushing the UPS shipping limits. Not to mention my back. I am still looking for some parts that I can buy from local suppliers to include in the kit. You wouldn't believe the sources within a 2mile area where I work.
|
|
#57
Tue 23 December 2008, 20:55
|
|||
|
|||
|
Revision control was often difficult when working with vendors at my old job. I dealth with circuit boards with multiple copper and parts list revisions. Thousands of dollars of scrap through mistakes and misunderstandings (theirs and mine
 ).
|
|
#58
Thu 25 December 2008, 09:13
|
|||
|
|||
|
Kit arrived
Joe,
I forgot to say that my laser parts arrived a few days ago. They look great! Nice touch adding the leveling feet and the MechMate logo’s. Thanks a lot!!! BillT
|
|
#59
Fri 09 January 2009, 18:23
|
|||
|
|||
|
Laser Cut Parts
For those wondering, I still have a few more sets left.
The Laser company and bending fabricators are moving to another location. Lucky me, they are together and closer to where I work. So, It might be 3-4 weeks before they get everything back together and I get another batch. Parts are currently $474.00 Plus actual shipping(64lbs). For any questions, email me at: [email protected] Thanks Joe
|
|
#60
Tue 13 January 2009, 18:42
|
|||
|
|||
|
Joe,
Thanks for sending me the Decals. Can't wait to put them on. Mike
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Laser Cut and Bent Parts - Europe | milkov | Profiled (laser cut) & bent steel plate | 33 | Fri 17 August 2012 13:13 |
| Laser Cut and Bent Parts - India | dsingh82 | The Market Place | 10 | Thu 01 October 2009 04:14 |
| Laser cut and formed parts | Castone | Profiled (laser cut) & bent steel plate | 5 | Sat 05 September 2009 00:40 |
| Greetings all From United States | derekkest | Introduce yourself and start planning | 3 | Tue 09 June 2009 06:29 |
| laser burnt pre-bent parts | ghostlx | Archives | 4 | Mon 22 September 2008 05:18 |
