MechMate CNC Router Forum - Quick & nasty router bracket

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- 50. Toolheads (http://www.mechmate.com/forums/forumdisplay.php?f=25)

- - Quick & nasty router bracket (http://www.mechmate.com/forums/showthread.php?t=732)

Gerald D

Sat 03 May 2008 08:26

Quick & nasty router bracket

1 Attachment(s)

This is ShopBot's original router bracket design, with some "improvements" . . . . .

The red bit is some channel, screwed to the z-slide, with a small gap between the back of the channel and the slide. (washers in between).

Router sits on the legs of the channel.

Dotted cyan line is a hose clamp!

Attachment 1321

My improvements? . . . .

A rubber sheet for more grip and a second hoseclamp! :D

dmoore

Sat 03 May 2008 14:34

It's great to see you work on continued improvements/alternatives.

All times are GMT -6. The time now is 10:19.