MechMate CNC Router Forum - Cutting 'Red Gum' Slabs for Table Tops

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- Miscellaneous / General / Whatever / Catchall (http://www.mechmate.com/forums/forumdisplay.php?f=13)

- - Cutting 'Red Gum' Slabs for Table Tops - South Australia (http://www.mechmate.com/forums/showthread.php?t=3639)

Quadro

Thu 05 January 2012 18:55

Cutting 'Red Gum' Slabs for Table Tops - South Australia

1 Attachment(s)

I helped a mate cut up a 'Red Gum' log today which will create work for the MechMate surfacing and engraving the slabs into finished products.
The log is 10ft x 3ft diam.
Attachment 12854
Having contacts with people who have these machines can help keeping the MechMate moving($$).

jehayes

Wed 11 January 2012 23:23

That's some log! Let us see the slab on the MM, please.

All times are GMT -6. The time now is 14:00.