Machined or fabricated parts
 

Hi,
I'm thinking if there is enough interest in making parts such as spacers, brackets, bearing guide rails, mounts for spindles, routers, plasma, laser, and or whatever else you can think of.
I built a red chain drive MechMate with my nephew Collin finished in September 2010 can be seen in MechMates already cutting.
It has gear reduction boxes on it now all made in my shop at home. If you are interested just ask for a price on a part or project and we will see how it goes.
I know the bearing guid rails are very time consuming but I don't know what would be a price that would be acceptable with shipping, maybe we could get a consensus on that.
Thanks, Scot

Hey Scot.

You can put in your thread the new gear reductions and the specs?

73's

isladelobos
Yes, i will do the best i can the belt was a bit short and made the machining and fitting a bit difficult. The two belt gears should have been
another 1/4" apart.
We'll get those pics as soon as possible.
Thanks, scot