MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   General - MM Build (http://www.mechmate.com/forums/forumdisplay.php?f=11)
-   -   Need a HI-Rise photo of a large size working MM (http://www.mechmate.com/forums/showthread.php?t=2939)

Stepinwolf Sun 25 July 2010 10:00

Need a HI-Rise photo of a large size working MM
 
I am setting up my shop, and would like to have a photo of a large size table ( 4' x 8', 10', or 12' ) that I could use, in order to make a poster suitable for framing. This will not be use for any commercial purposes, just to decorate my own shop. I do plan on having a photo of my own MM in a few years.

Please do not post any photos to the Forum, but send them by e-mail, ( not reduced in size since I have a high speed connection ) to the following,,,

[email protected]

A big " thank you " :) to those of you who will take the time to address my concerns

Robert
Trois Rivieres, QC.


All times are GMT -6. The time now is 12:22.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.