MechMate CNC Router Forum - What mode are u running your motor

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- Archives (http://www.mechmate.com/forums/forumdisplay.php?f=68)

- - What mode are u running your motor - Unipolar Bipolar (http://www.mechmate.com/forums/showthread.php?t=267)

eloid

Wed 21 March 2007 16:26

What mode are u running your motor - Unipolar Bipolar

want to build 5x10 table, with some 720 oz /motors
dont know which is the better set up?

Gerald_D

Wed 21 March 2007 21:32

Suggest you get 8-wire motors, and wire them unipolar (half-windings) for a start.

eloid

Thu 22 March 2007 18:05

CAn you explain why ...to wire them half winding?

Gerald_D

Thu 22 March 2007 21:23

All times are GMT -6. The time now is 17:58.