Touch probe - $99
 

I have a great touch probe I sell for $99.
Shipping is $7 in the US, most others are $10.40.
You can see my probe and pictures at
http://www.machsupport.com/forum/ind...ic,5004.0.html

I have limited production capability but can usually ship with a day or 2.
The probe is convertable from 3d touch probing to a tool height setting pad.

To order email me for availability and send paypal to [email protected]

Thanks
Arnie

I purchased one of Arnie's probes. Nice product.

Had the probe connected in less than 1/2 hour. Mach already has a digitizing pluggin (free).

Had a 7,000 + point cloud in about 1 hour.

I'm using Rhino 4.0, which has a Pluggin (Rhino Point Cloud, $295) that makes a surface from point clouds.

I have always wanted to do reverse Engineering this way. Way cool :cool:.

got your brochure sometime ago, the url in the brochure no longer works. Thought you're gone.

Nice to see you here.

I'll definitely order one when i finally get my build complete.

Thanks for the replys, and the nice comments.
I will check on that URL on my brochure.