Spindle pre-planning questions
 

In very general terms, can someone tell me what additional components and complexities there are in the electronics of the machine when using a spindle over a router? I assume the wiring of the spindle itself is a little more complex and it needs the VFD but is that all? Are there more relays, more complex wiring, additional safety concerns (e-stops)?

I still have plenty to read on the subject (hence the pre-planning title) but I wanted to get a general idea. I'm not looking for part number or schematics, just some general info.

Thanks,
Rick

Try this thread for starters

http://www.mechmate.com/forums/showthread.php?t=1152

and then this one.

http://www.mechmate.com/forums/showthread.php?t=1008

and

http://www.mechmate.com/forums/showthread.php?t=1241

and maybe

http://www.mechmate.com/forums/showthread.php?t=247

:)

Cool, thanks.

The jungle of threads on this topic is quite dense...but that helps :)

-Rick

Yes, it takes a bit of digging but there is some iteresting reading on spindles in there. :)