MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   MechMates already cutting (http://www.mechmate.com/forums/forumdisplay.php?f=78)
-   -   More progress, it cuts ! #109 - Hampshire, UK (http://www.mechmate.com/forums/showthread.php?t=4019)

Andrew_standen Sun 01 September 2013 20:04

Thank you all your kind words and help guys, now the fun really starts

MetalHead Mon 09 September 2013 11:34

Great build !!! Glad you could get those logos local :o :) !!! You get #109

Andrew_standen Mon 09 September 2013 12:32

Thank you Mike.
Proud owner number 109
Andrew

darren salyer Mon 09 September 2013 21:12

Very well done, Sir.
Now the real fun starts....

Andrew_standen Wed 11 September 2013 08:07

1 Attachment(s)
Ran the Mechmate for 3 hours last night. Largest card is 250mm by 430mm.
Maximum depth 2.5mm into 6mm material.
Kept the good lady happy.
And now I have a few more to make !

I want to make chairs......
but all this machine has done is to increase my honey list !
Lol.

KenC Wed 11 September 2013 08:27

Nice job!

jhiggins7 Wed 11 September 2013 08:39

Updated Builder's Log
 
Andrew,

Congratulations on completing your build and earning Serial Number 109.

Here's the Updated Builder's Log with your entry added.

Andrew_standen Wed 11 September 2013 09:06

Thanks John.

HomeMadeCnc Wed 11 September 2013 14:27

Congratz on the build and your projects! This machine will change your life, good luck on the schooling, lots to learn ;)
Cheers!

MK_CATANZARO Thu 19 September 2013 09:10

If you mirror those tarot cuts and roll ink on them, you have a nice set of printing blocks. I've been doing a few of these lately and it works beautifully on the mechmate. I use Extira for mine because of the moisture resistance.

Andrew_standen Mon 23 September 2013 16:56

Thats a good idea. Might try that. Cheers

Andrew_standen Tue 15 October 2013 08:39

5 Attachment(s)
Having fun with this. Found a use for scrap ply from work.

darren salyer Tue 15 October 2013 08:42

Very nice. I've never been able to get ply to look that good.

KenC Tue 15 October 2013 09:48

Loving it!!!
Would you care to elaborate what that tooth brush is for?

sailfl Tue 15 October 2013 12:34

Ken,

That is what he used to stain the wood.

KenC Tue 15 October 2013 12:42

Nils,
Thanks for the heads up.

Andrew_standen Tue 15 October 2013 14:22

Used Gaboon plywood scraps from work.
Nice clean 18mm plywood.
Cam was aspire.
Running mach3
Cutter onsrud 30-25 I think. 1/4 inch shank. 0.020 inch tip on 30 degrees
Running at 2100 rpm. Feed 2500mm per min. 1.3mm depth of cut. One pass.
Program ran for 2hours 3mins.
Wax (applied with old tooth brush) is liberon bison black walnut.
Comes up with a nice shine.

Andrew_standen Tue 15 October 2013 15:55

Opps that should read . Running at 21000 rpm.!

lonestaral Tue 15 October 2013 20:06

Looks good.
Better than the plywood we get here.

Andrew_standen Wed 15 January 2014 09:07

Dolls House
 
1 Attachment(s)
Had to have a go at a makecnc.com dolls house for my grand daughter.
So I ran this on 6th mdf then painted it.
2.5mm cutter on 6th mdf. 12000 rpm 3000 mm per minute. 4th depth of cut.
Result.

pblackburn Wed 15 January 2014 15:25

My wife and I commented about if we had daughters or young nieces that would be an awesome thing to do. That is some nice work. Thanks for sharing.

Andrew_standen Sat 01 March 2014 09:21

1 Attachment(s)
Trying wooden books. Maple faced plywood. 6mm thick, engraved 1mm painted black sanded then Danish oil.

Andrew_standen Sat 01 March 2014 09:33

2 Attachment(s)
A couple of bit made today.out of American black walnut. 35mm thick.

Andrew_standen Sat 01 March 2014 09:42

1 Attachment(s)
Playing with dovetails. Drawing in alpha cam . Put a flat end my mechmate to hold the material. Works ok but not pretty.

darren salyer Sat 01 March 2014 11:23

Very nice work, Andrew!!

Andrew_standen Sat 01 March 2014 17:38

2 Attachment(s)
Thanks Darren.
I'm working on all sorts of things.
Would like to cut portraits but not sorted that one out yet.
I've been working on chairs for the last five years.
I'm not fast that's for sure.
The adirondack chair has no screws or nails just wooden dowels and folds for storage.
The small chair is a chair I made for one of my granddaughters. Made matching tables.
got three granddaughters so have made 3 so far. Good for 1 to 3 or 4 year old.

servant74 Sat 01 March 2014 18:25

Looks Great

parrulho Sun 02 March 2014 09:36

Very nice work, perfect dovetails.

andrewuk Mon 10 March 2014 05:15

Nice work,especially the key.

Andrew_standen Mon 10 March 2014 12:57

Hi Andrew. I've just got to make a jumbo padlock .... lol

Andrew_standen Thu 19 February 2015 03:12

Engraving Brass
 
http://lh4.ggpht.com/-jTt9L9FzavI/VO...219_084918.jpg

Hi guys. Not posted for some time. Been very busy. Had to make a stamp to go on some products. Though I would try Brass. Worked ok for my first attempt. Still stunned how well this machine cuts.... details 10k rpm feed speed 1000mm min. Doc 0.2mm cutter I a 0.5mm dua ball nose. 0.25mm Rad. Total depth cut 1mm. Time 35mins

Tom Ayres Thu 19 February 2015 03:56

Very nice Andrew, I'll have to use your set-up for reference should I need to cut brass.:)

pblackburn Thu 19 February 2015 17:45

Good hearing from you Andrew. Nice work.

Robert M Thu 19 February 2015 18:29

amazing how small this is....and done with your beast!! :cool:
Well done ;)

Andrew_standen Fri 05 February 2016 12:34

Well I'm up and running again... been 6 months.. Moved to Dorset...built a 6mtr by 5mtr workshop in my garden and moved the machine in over Christmas.. now busy cutting a dolls house for a grand daughter.. nice to be cutting again.

Andrew_standen Thu 23 July 2020 14:23

Mechmate #109 is now for sale.
Christchurch Dorset.
Photos to follow


All times are GMT -6. The time now is 08:41.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.