| Author |
Message |
    
Donald Neisler
Registered
Username: Dneisler
Post Number: 4
Registered: 12-2006
| | Posted on Tuesday, December 12, 2006 - 04:05 am: | 
|
Sounds like I may start building soon.
I was reading the plans and have a question.
10.30.450 - The V-Roller Holes, un slotted, and slotted vertically. What does it mean exactly by this. I don't want to assume anything here? |
Gerald_D
Registered
Username: Gerald_d
Post Number: 628
Registered: 11-2005
| | Posted on Tuesday, December 12, 2006 - 06:35 am: |
|
The slotted holes have provision for moving the V-Roller wheel by a tiny amount in the vertical direction. This is in case the Y-Car is slightly twisted after welding it together - then two wheels can be adjusted to make all 4 of them seat firmly on the rails. |
Donald Neisler
Registered
Username: Dneisler
Post Number: 5
Registered: 12-2006
| | Posted on Tuesday, December 12, 2006 - 04:18 pm: |
|
That is what I was assuming, but by looking at the drawings I could not confirm that,or I was not thinking right one.
Thanks Gerald.
I am waiting on some laser quotes now. |
Donald Neisler
Registered
Username: Dneisler
Post Number: 6
Registered: 12-2006
| | Posted on Tuesday, December 12, 2006 - 08:51 pm: |
|
Got a surprise on my laser quote.
1030422 - $26.XX
All the Cart parts where like $80
I expected alot more here in the US. |
Gerald_D
Registered
Username: Gerald_d
Post Number: 630
Registered: 11-2005
| | Posted on Tuesday, December 12, 2006 - 09:24 pm: |
|
Yup, lasercut steel can be surprisingly economical  . But wait till you see the parts and then you will doubly appreciate it - the accuracy is amazing as well. |
DocTanner
Registered
Username: Doctanner
Post Number: 10
Registered: 11-2006
| | Posted on Wednesday, December 13, 2006 - 06:00 pm: |
|
Donald,
I would be greatly interested in your laser cutting supplier. I seem to have trouble finding one interested in doing small quantities.
Thanks |
Donald Neisler
Registered
Username: Dneisler
Post Number: 10
Registered: 12-2006
| | Posted on Thursday, December 14, 2006 - 05:21 am: |
|
Doc,
It is Heartland Laser, www.heartlandlaser.com, if we ordered together, it would be cheaper. Cause they are charging me $45 programming fee, we could split that and save $22.50 there. I own a business and ship fedex every day, so I could ship out yours easy. I am only about 3 hours from them.
Just a idea,
Email if you want to talk about that
[email protected]
Donald |
Kim Mortensen
Registered
Username: Inwonder
Post Number: 21
Registered: 12-2006
| | Posted on Thursday, December 14, 2006 - 08:32 am: |
|
Looking at build cost I think I'm one of the few who are able to do it alot cheaper than most of you guys. I have access to a laser cutter myself at work, This brings down my cost of cutting the lasercut pieces to an absolute zero as I also can get pieces of metal for free. WOW nice right. Then on top of that I get procentage of steel at my dads work where they also can saw and bend a few more things for me. And the processing is also almost free of charge, only the steel I will have to pay for. Nuts and bolts washers and so on I can get for free. So I'm thinking that my cost of the entire machine will be anywhere from 2-4.000$ Or below 3.000 Euros. Kind a nice right,... Just a little showoff I am... If anyone is situated in Denmark then I can lasercut for you at a very very low price.... |
vadeem
Registered
Username: Vid1900
Post Number: 26
Registered: 10-2006
| | Posted on Thursday, December 14, 2006 - 09:52 am: |
|
Donald, lets split it some more and really get crazy. I'll go in on 2 sets maybe 3.
I see they do bending too, so you might as well add that in also.
Our local guys were quoting around $125 USD, for the 1st set, including programing. They said each additional set was a magnitude cheaper. If we can get a few more people on board, we should be able to all save some real money.
Thanks |
John Fredriksen
Registered
Username: Frederj
Post Number: 1
Registered: 11-2006
| | Posted on Thursday, December 14, 2006 - 03:16 pm: |
|
I will committ to one set. I am in Jasper, IN so shipping should be reasonable.
Cheers,
John |
Donald Neisler
Registered
Username: Dneisler
Post Number: 11
Registered: 12-2006
| | Posted on Thursday, December 14, 2006 - 04:54 pm: |
|
Anyone interested in a set send me a email. I am working with them today and tomorrow on getting a quote for a complete set of parts together.
NOTE: They do not do the bending.
Vadeem,
Your quote for $125 for all sounds cheap. Mine was for $117 for just the main Cart parts.
Gerald,
Do you have a exact list of what is needed by qty. I know I have the dxf files but it doesn't state how many of each is needed with out going through the plans. I want have time to do that till tonight. If you have that, or someone for that matter I can get started today.
Thanks |
Gerald_D
Registered
Username: Gerald_d
Post Number: 637
Registered: 11-2005
| | Posted on Thursday, December 14, 2006 - 05:18 pm: |
|
2 off 10 20 454, 5mm or 3/16" thick
4 off 10 20 456, 3mm or 1/8" thick
1 off 10 30 422, 2mm thick or 14 gauge
2 off 10 30 450, 5mm or 3/16"
2 off 10 30 455, 4mm or 5/32" thick
1 off 10 40 432, 4mm or 5/32" thick
1 off 10 40 434, 6mm or 1/4" thick
4 off M5 10 312, 6mm or 1/4" thick
1 off M5 10 322, 6mm or 1/4" thick |
Donald Neisler
Registered
Username: Dneisler
Post Number: 12
Registered: 12-2006
| | Posted on Thursday, December 14, 2006 - 11:00 pm: |
|
Man...they can't get me a quote till tomorrow the guy who does the quotes is out today.
As I mentioned just email any interested and I can see if we can get a group by cheaper.
Thanks Gerald for the breakdown above, made it alot easier. |
Donald Neisler
Registered
Username: Dneisler
Post Number: 13
Registered: 12-2006
| | Posted on Friday, December 15, 2006 - 10:48 pm: |
|
Well not getting the numbers today, but they have cut one set so far....said the parts look great. They told me I should have the price monday for sure. Sorry to keep you guys waiting. I believe we are up to 5 sets, so we should get a pretty good deal I think if no one backs out.
The only drawback I have seen from this company is they do NOT do any bending. |
Donald Neisler
Registered
Username: Dneisler
Post Number: 15
Registered: 12-2006
| | Posted on Monday, December 18, 2006 - 08:47 pm: |
|
ok, I got the pricing. I am finalizing some details and figuring out what i would cost per set and then i will let you know.
It looks good to me so far :-) |
Bob Cole
Registered
Username: Bob_cole
Post Number: 15
Registered: 10-2006
| | Posted on Monday, December 18, 2006 - 10:52 pm: |
|
Don:
I am located in N.E. Ohio near the PA. border. I would be interested in getting a set of these parts also, if that is still available.
sincerly,
Bob C.
Please let me know what the costs would be for all the parts for the carriage and engine mounts etc. Anything that you would be getting laser cut. bending will not be a problem for me, IF your people aren't available to bend. |
Donald Neisler
Registered
Username: Dneisler
Post Number: 16
Registered: 12-2006
| | Posted on Monday, December 18, 2006 - 11:11 pm: |
|
Bob I am still working on the numbers. I have a quote for a single set and a set of 5-10 and trying to get the price right with them.
I should have more info later today or tomorrow. I know I am ready to order mine asap and counting bob if everyone wants a set that is 7 set so I hope we can get a good deal. Shipping will be the worst I think due to weight. I personally will drive and pick them up to save freight to me. |
Gerald_D
Registered
Username: Gerald_d
Post Number: 647
Registered: 11-2005
| | Posted on Monday, December 18, 2006 - 11:14 pm: |
|
The weight of one set should be 20.4kg or 45 lbs before any packaging or crating is added. |
Donald Neisler
Registered
Username: Dneisler
Post Number: 17
Registered: 12-2006
| | Posted on Tuesday, December 19, 2006 - 04:21 am: |
|
Good info Gerald. I am trying to figure out how to ship it the best, cheapest. Any suggestions.
Once I get that, and a final reply from the cutter I will have prices out. I am estimating/Guesstimateing $175 + Shipping.
Does that sound decent or am I wasting my time? As I said it is a guestimate, still waiting on info. |
Bob Cole
Registered
Username: Bob_cole
Post Number: 16
Registered: 10-2006
| | Posted on Tuesday, December 19, 2006 - 05:24 am: |
|
Don:
If I see this correctly you are talking about (18) seperate parts of varying weights. ALL laser cut to exact dimentions per Geralds plans, Correct? Steel supplied by the laser cutter, Correct? If that is correct, then your Guestimate of $175.00 plus shipping seems fair to me. If someone else sees it differently let them speak up NOW, or forever hold your tongue..
I'm in. Bob C. |
Donald Neisler
Registered
Username: Dneisler
Post Number: 18
Registered: 12-2006
| | Posted on Tuesday, December 19, 2006 - 06:06 am: |
|
You are correct. Again, this is a estimate, still waiting on exact info. They misunderstood some of the things i asked for so we are working on the final information.
I honestly expected it to cost $500 myself so I am happy. :-) |
Thomas M. Rybczyk
Registered
Username: Rypper
Post Number: 1
Registered: 07-2006
| | Posted on Tuesday, December 19, 2006 - 01:45 pm: |
|
Don,
You can add me to the list if it's still open.
I am located in New Jersey Zip 08029.
Thanks,
Tom |
Donald Neisler
Registered
Username: Dneisler
Post Number: 19
Registered: 12-2006
| | Posted on Tuesday, December 19, 2006 - 04:22 pm: |
|
Wow, approaching 10 sets. Never expected this many :-)
I hope to know more later today.
Anyone have shipping ideas? I would use Fedex Ground due to I get good rates with them, cheaper than UPS for sure. Just thinking about what and how to package this 50#'s of metal in a box or ? |
Gerald_D
Registered
Username: Gerald_d
Post Number: 651
Registered: 11-2005
| | Posted on Tuesday, December 19, 2006 - 05:41 pm: |
|
If the parts are bent, the biggest part is the Y-car plate 1030422B and all the othe parts fit inside of that. A tall_tower_PC's box will hold it all. |
Donald Neisler
Registered
Username: Dneisler
Post Number: 20
Registered: 12-2006
| | Posted on Tuesday, December 19, 2006 - 06:22 pm: |
|
The Parts are not bent.
I just got a second quote for a single set, as I checked a couple places. $425 + Shipping.
WOW, this $175 is looking sweet now. |
General