| Author |
Message |
    
Gerald_D
Registered
Username: Gerald_d
Post Number: 974
Registered: 11-2005
| | Posted on Wednesday, February 21, 2007 - 09:13 pm: | 
|
Hi All, it looks like we can source the 12 rollers and eccentric bushings as a complete set for only $185.52, excluding shipping, from Ohio. If interested, drop a mail to vrollers(at)mechmate(dot)com and I'll get the supplier to contact you. This offer is for MechMate builders only, and all applications may not reach the supplier. |
Gerald_D
Registered
Username: Gerald_d
Post Number: 1117
Registered: 11-2005
| | Posted on Tuesday, March 06, 2007 - 09:12 pm: |
|
Some explanations....
Sending a mail to the address above now sends copies of that mail to the bearing company as well as to myself. So all applications do now reach the supplier.
Folk are buying too many bushings for the bearings. You need 12 size "3" wheels and 4 eccentric bushings only. No plain bushings needed. Of course you are welcome to buy more bushings (they are very cheap), but there are not going to be enough places to fit them. The 8 wheels of the x & y axes sit on 12mm bolts that completely fill the inside of the V-roller wheels. |
Bill McGuire
Registered
Username: Johnnydoughey
Post Number: 9
Registered: 12-2006
| | Posted on Wednesday, March 07, 2007 - 01:43 am: |
|
Thanks much Gerald... again! |
Charlie T
Registered
Username: Popbing
Post Number: 18
Registered: 11-2006
| | Posted on Wednesday, March 07, 2007 - 08:49 pm: |
|
Ordered mine today. |
Hugo Carradini
Registered
Username: Hugotel
Post Number: 56
Registered: 11-2006
| | Posted on Thursday, March 08, 2007 - 03:17 am: |
|
Got mine confirmed.
Thanks |
Greg J
Registered
Username: New_mexico_woodworker
Post Number: 5
Registered: 03-2007
| | Posted on Thursday, March 22, 2007 - 08:38 pm: |
|
Contacted them last night and will order in a couple of weeks. I'm re-drawing and re-working the design.
Can't say enough about what a great site this is. |
Pierre GRAND
Registered
Username: Grandpi
Post Number: 7
Registered: 03-2007
| | Posted on Monday, April 02, 2007 - 10:50 pm: |
|
i have ordered from France the complete set. i have received it 5 days after. Great buyer. Thank you Gerald. |
Arthur Ransom
Registered
Username: Akransom
Post Number: 32
Registered: 09-2006
| | Posted on Tuesday, April 03, 2007 - 12:18 am: |
|
can't get email to go through. vrollers(at)mechmate(dot)com
Need to get a set ordered
[email protected] |
Gerald_D
Registered
Username: Gerald_d
Post Number: 1209
Registered: 11-2005
| | Posted on Tuesday, April 03, 2007 - 07:44 am: |
|
Did get your mail of Sunday - maybe they were a bit busy to reply yesterday? |
Rails & Rollers