MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Archives
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Closed Thread
 
Thread Tools
  #1  
Old Thu 25 January 2007, 11:39
Gerald_D
Just call me:
 
Work of Hani Al Mandeel in Bahrain

These pics illustrate the type of "carvings" that can readily be done with a MechMate.....









  #2  
Old Thu 25 January 2007, 11:43
Gerald_D
Just call me:
 











  #3  
Old Thu 25 January 2007, 12:11
fabrica
Just call me:
 
Gerald, Can you please send to me one of these cutting files (on a format which could be used on Artcam) so that I too could try them out in my machine.
  #4  
Old Thu 25 January 2007, 12:20
Gerald_D
Just call me:
 
I don't have any of Hani's files, all I have are some photos and email correspondence. He also started with a ShopBot, found that he wanted to do bigger stuff, and then built his own CNC router. So I thought, if Hani can do it in Bahrain, I can do it in South Africa....
  #5  
Old Thu 25 January 2007, 12:30
Gerald_D
Just call me:
 
This may be interesting for you:
www.abbott.demon.co.uk/knots.html
www.clanbadge.com/knots.htm
Closed Thread

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 15:56.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.