MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Electrical & Electronic > 701. Motor Drives
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Thu 08 July 2010, 01:10
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Dead Gecko's in S.Africa - a collection point for bulk return for repair

Following on from this post, I hereby offer to assemble a single parcel of dead Geckos to go back to Geckodrives California for repair. Have to make some rough rules first:
- Shipping cost to be divided pro-rata the number of Gecko owners participating (not per the number of individual units)
- I accept no risks for loss, you give me your "scrap" and hope for the best.
- You pay before the diagnosis of Geckodrives is revealed (if your drives are not repairable, you still pay your share of the shipping cost).
- I will use UTI Sun Couriers, economy option, to send them out.
- I will try and twist Geckodrive's arm to send repaired drives direct back to individual owners, otherwise your courier must collect from me.
- The drives must be free of grease, sawdust, dirt
- There must be a removable label on the back (grease side) with your name, and your ID for the drive.
- For each returned drive, GeckoDrives wants full disclosure on what you think may be wrong, or how you could have contributed to the drive failure. Even if you shorted it out, you need to say so. (I won't publish those disclosures)


Before we start the process,
- I will check the approx cost of using Sun Couriers
- Please put up your hands to show how many people will be splitting the cost . . . . .

Last edited by Gerald D; Thu 08 July 2010 at 01:13..
Reply With Quote
  #2  
Old Thu 08 July 2010, 01:41
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
Like I said 2 units for me.
Reply With Quote
  #3  
Old Thu 08 July 2010, 07:14
CAM Craft
Just call me: Sean D
 
Cape Town
South Africa
definitely 2 for me (201 and a 203v). there is 3rd gecko somewhere (Jordan's mishap)
Reply With Quote
  #4  
Old Fri 09 July 2010, 04:18
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Sun Couriers is quoting about R 1 600 (VAT incl.), which I think is a bit steep if split only 2 ways. Especially if we don't have any guarantees that anything will come back at all....
Reply With Quote
  #5  
Old Fri 09 July 2010, 04:27
CAM Craft
Just call me: Sean D
 
Cape Town
South Africa
does the R1600 incl the return flight
Reply With Quote
  #6  
Old Fri 09 July 2010, 05:47
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
Suppose not. That is a lot of money. Why not pop it into a bubble envelope and into the post ?
Reply With Quote
  #7  
Old Fri 09 July 2010, 06:30
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
The return flight will be paid by Gecko (if they deem the drives to be repairable).

I have already lost 4 new gecko's in the post office system. Kobus, if you are happy to use the post office, then why bother to share cost with a guaranteed delivery system?
Reply With Quote
  #8  
Old Fri 09 July 2010, 09:30
Jan de Ruyter
Just call me: Jan
 
Pretoria
South Africa
There is a postal service available, but ONLY at the airports; called First Flight. Was used in the good old days where the important envelope was personally handed to the pilot. Used that to get things out of the country REAL FAST and inexpensive. Got a delivery next day in Zürich for a few Rand. But, only available at the counter of the post office at the airport. Less risk of "pilferage". Destination doesn't matter.
Reply With Quote
  #9  
Old Fri 09 July 2010, 13:21
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
As I have new type of drives available I don't think that price for postage will be beneficial to me. I just thought to have them fixed to donate them to somebody that needs them in future. So if somebody want to have them fixed (maybe) and send them with Gerald, feel free to contact me so that we can arrange postage.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cool tables and spindle ordering fun #6 - Brakpan, S.Africa Kobus_Joubert MechMates already cutting 1586 Mon 01 July 2019 00:50
AIR in AIR out - analysing the air flow at the collection point Besser 55. Dust Management 17 Wed 16 December 2009 07:44
Setting up the 0,0 point for a job . . . . Gerald_D General - MM Operating 18 Tue 07 April 2009 18:56
Will Computer Power Supplies drive the Gecko's? Cutter99 702. Power Supplies 4 Thu 22 January 2009 00:52


All times are GMT -6. The time now is 03:16.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.