|
|
|||||||
| Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools |
|
#1
Wed 14 January 2009, 18:59
|
|||
|
|||
|
C Channel of Cross Bearings not square
The C Channel I bought for the cross bearers is not square, I mean it is straight but its profile has not perfect 90 degree angles in the corners it has more than 90 degrees to explain it in other way the C is kind of open, Not so good quality control i guess, is this common is this type of profile?. Im concern about this, does this afects the table in some manner? My logic tells me that Ill not hace a problem, but Ill better ask before welding.
Last edited by kanankeban; Wed 14 January 2009 at 19:03.. 
|
|
#2
Wed 14 January 2009, 21:08
|
|||
|
|||
|
Hector, for this job it will be 100%. No problems expected.
|
|
#3
Thu 15 January 2009, 07:23
|
|||
|
|||
|
Quote:
Thats what I expected...but is better to ask  Thanks again for your help... Regards, Hector
|
|
| Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
| Thread Tools | |
|
|
