MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Structure & Mechanics > 50. Toolheads
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Sun 06 November 2011, 18:14
Malfaiteur
Just call me: Malfaiteur
 
Florida
United States of America
air spindle vs electric

I tried searching and found no information. I was wondering what the pros and cons of going with an air spindle as opposed to an electric motor. Thanks much.
Reply With Quote
  #2  
Old Sun 06 November 2011, 20:09
KenC
Just call me: Ken
 
Klang
Malaysia
AFAIK, in general, properly treated compressed air, i.e. filtered, de-watered & lubricated, will supply necessary lubrication to the running parts, it also does a great job at removing heat. No carbon to replace, don't need fancy electronics for speed control, and for any reason when the spindle get jammed, there isn't any wires to burn.
BUT they tend to have less torque at low speed. unlike electric motor & hydraulic motors.
That is why pneumatic drills usually comes in very high speed to make up for the poor torque characteristics...
Also pneumatic drills are noisy...
Reply With Quote
  #3  
Old Sun 06 November 2011, 22:07
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
An air spindle's speed is very unpredictable and uncontrollable. The speed drops off with increase in load. The spindle can stall without any way of detecting it. It is okay for hand tools where the operator can hear the speed and adjust the load by changing hand pressure
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Electric Kits MetalHead The Market Place 65 Thu 09 October 2014 18:53
New Electric Motors jehayes Miscellaneous / General / Whatever / Catchall 0 Wed 08 June 2011 11:58
Electric kit i have found opinions please Mojo General - MM Build 2 Wed 20 October 2010 13:06
Electric Engraver as a toolhead lumberjack_jeff 50. Toolheads 14 Mon 30 August 2010 19:42
Help for a null electric guy Gato Richy 702. Power Supplies 12 Thu 26 March 2009 00:38


All times are GMT -6. The time now is 10:45.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.