MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Common Assemblies & Parts > Profiled (laser cut) & bent steel plate
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools
Old Thu 23 October 2008, 21:55
Just call me: Joe #42
Birmingham, AL
United States of America
Small Parts that keep You from building a MM

What are some of the small parts that are not "Laser Cut" that are keeping you from building a MechMate?

My Father-in-law has a metal fabrication shop! If I can accrue a list of parts that people donít have the means to machine, I can see if any of his workers would be interested in a side job.
This was a problem for me. Thank God for My father in law!!!!!

This is just an idea I had.

Reply With Quote
Old Thu 23 October 2008, 23:25
Gerald D
Just call me: Gerald (retired)
Cape Town
South Africa
Joe, for a start, have a look at the drawings with "T" as the process.
Reply With Quote
Old Fri 24 October 2008, 00:27
Just call me: Nils #12
Winter Park, FL
United States of America

Look at the router bracket. I purchased a router bracket for a Milwaukee router. It cost me more than a standard router because of the refinement screw. I have since removed the screw from the router and I could have used a generic bracket that would fit the Milwaukee motor. I would like to have a place to put the laser on the right side. If you could bring the price down, you would have a market.

Look at M1-20-220. I found some thing that will work but a reasonably priced support bushing.
Reply With Quote

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -6. The time now is 10:36.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.