MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Personal Build Histories > MechMates already cutting
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #61  
Old Wed 01 December 2010, 10:58
domino11
Just call me: Heath
 
Cornwall, Ontario
Canada
Why is it I get the feeling Camille is helping with this build?
Reply With Quote
  #62  
Old Wed 01 December 2010, 11:12
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
Quote:
Originally Posted by domino11 View Post
Why is it I get the feeling Camille is helping with this build?
Heh. I think he's encouraging me along so he gets to play with the MechMate the next time he visits . He's certainly not lifting any steel from 700 miles away!

(for those unaware, Camille is my brother)
Reply With Quote
  #63  
Old Wed 01 December 2010, 11:13
camilleg
Just call me: Camille
 
Urbana, Illinois
United States of America
Only fair, Melissa helps me at a similar distance with aeromodeling and other bricolage!

Last edited by domino11; Wed 13 August 2014 at 10:06..
Reply With Quote
  #64  
Old Tue 14 December 2010, 21:29
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
First parts painted

I just finished welding the end plates on the legs, and cutting the foot plates (my laser kit predates the laser-cut plates).

It's currently -10°C outside, and hovering around 0°C in my workshop, so I had to get creative for the paint to dry. There's a 500W heater hiding in the foam "oven". The steel is around 23°C right now, which is enough to get the paint to dry. I just painted the bottoms of the table legs, as the rest will be painted once the sides are welded together.
Attached Images
File Type: jpg oven_closed.jpg (23.4 KB, 1436 views)
File Type: jpg oven_contents.jpg (32.1 KB, 1436 views)
File Type: jpeg foot_plates.jpeg (29.1 KB, 1428 views)
Reply With Quote
  #65  
Old Wed 15 December 2010, 10:47
camilleg
Just call me: Camille
 
Urbana, Illinois
United States of America
That stable of sawhorses remains useful. On Dancer, on Prancer,...?
Reply With Quote
  #66  
Old Wed 15 December 2010, 22:19
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
I like those pyramids...handy little things.
Reply With Quote
  #67  
Old Thu 16 December 2010, 00:30
danilom
Just call me: Danilo #64
 
Novi Sad
Serbia
Painter pyramids
http://www.painterspyramid.com/ handy things
Reply With Quote
  #68  
Old Wed 29 December 2010, 20:17
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
First Side Welded

The first side of the table is now welded. I used a whole bunch of wood blocks to shim the legs and lower longitudinals to the correct height, before tack-welding. I was more concerned with coplanar than level, so the legs are in line with the main beams (when standing vertically).

One "oops" on this stage: I knew I had to be careful about which end had the 100mm offset for the spoilboard. I carefully measured and welded. And once I had welded enough that I couldn't go back, realized that I got it backwards from the orientation I wanted . It is nice and accurate, though! So... once I've welded both sides, they'll get placed on moving dollies and be rotated around the other way.
Attached Images
File Type: jpg shopcam201012292156.jpg (54.8 KB, 1284 views)
Reply With Quote
  #69  
Old Thu 30 December 2010, 06:46
smreish
Just call me: Sean - #5, 28, 58 and others
 
Orlando, Florida
United States of America
...and I can't wait to see how that 5100mm long table looks standing up!
I certain you will get plenty of thanks from that gantry crane.

Great work.
Thanks for sharing.

Sean
Reply With Quote
  #70  
Old Sat 01 January 2011, 20:02
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
Table goes 3D!

Well, upside-down 3D, but 3D nonetheless .

The clamped 2x4's are to keep things in position, and to keep the sides from falling on me . The sides are positioned to within about 5mm of where they need to be.

Next up is cutting and tack-welding the cross braces. They'll be bolted in temporarily, so I can invert the table one side at a time. I did NOT want to weld the whole thing upside down, and have to lift 500 lbs eight feet in the air.

BTW, I'm really happy with how rigid the sides are. With the beams resting on blocks at the ends, the middle needs to be shimmed to within 1mm tolerance, otherwise the middle blocks are completely loose. All those braces are there for a reason!
Attached Images
File Type: jpg shopcam201101012103.jpg (28.9 KB, 1207 views)
Reply With Quote
  #71  
Old Wed 05 January 2011, 17:20
camilleg
Just call me: Camille
 
Urbana, Illinois
United States of America
Why not 500 lbs 8 ft up? Movie stunts do that kind of thing all the time!
Reply With Quote
  #72  
Old Wed 05 January 2011, 18:11
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
8 ft is about the vertical hoist limit of my crane (beam is 10' high, chain hoist takes a bit over a foot of vertical). Plus, the chain hoist would require me to be almost directly below the object being hoisted. With that much potential energy... no thanks. I'll do it the slow and predictable way .
Reply With Quote
  #73  
Old Wed 26 January 2011, 18:34
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
Some recent progress photos: clamping the cross rails which will join the two sides of the table, prior to welding. I just about ran out of clamps. The good news is that nothing wiggled, and I didn't need to grind and re-weld any of these parts.
Attached Images
File Type: jpeg clamps_1.jpeg (38.9 KB, 1025 views)
File Type: jpeg clamps_2.jpeg (34.3 KB, 1027 views)
File Type: jpg clamps_3.jpg (39.5 KB, 1029 views)
File Type: jpeg clamps_4.jpeg (37.8 KB, 1032 views)
Reply With Quote
  #74  
Old Wed 26 January 2011, 18:36
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
Next, what it looks like welded, but still upside-down:
Attached Images
File Type: jpg table_welded_upside_down.jpg (33.9 KB, 1026 views)
File Type: jpg centre_braces_welded.jpg (29.1 KB, 1027 views)
Reply With Quote
  #75  
Old Wed 26 January 2011, 18:40
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
With that completed, the table was disassembled and placed aside, while work progresses on the gantry. First drilling the gantry tubes, and then the Y-rails, for the mounting bolts and proxys.
Attached Images
File Type: jpeg drilling_gantry_tubes.jpeg (32.7 KB, 1028 views)
File Type: jpg drilling_gantry_tubes_2.jpg (36.6 KB, 1025 views)
File Type: jpeg drilling_y_rails.jpeg (35.7 KB, 1032 views)
File Type: jpg drilling_proxy_holes.jpg (39.4 KB, 1030 views)
Reply With Quote
  #76  
Old Wed 26 January 2011, 21:51
camilleg
Just call me: Camille
 
Urbana, Illinois
United States of America
Between the friction of turning all those shavings and the raw heat of a 6 kW welder, you'd think that boots mitts and toque wouldn't be needed for long in the workshop!

Thanks for the photos.
Reply With Quote
  #77  
Old Thu 27 January 2011, 03:34
234ahmed
Just call me: Ahmed #81
 
Damietta
Egypt
Great Progress Melissa. Keep going and posting
wish you all the best

Last edited by domino11; Wed 13 August 2014 at 10:09..
Reply With Quote
  #78  
Old Sat 29 January 2011, 19:53
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
Gantry welded

Good progress today, finished clamping and squaring the gantry (for the third time, after being reminded to smooth the edges of the laser-cut parts before welding). The beams are clamped to my table saw.

With welding finished, I actually had to use the crane to lower the gantry to the ground. I haven't weighed it, but it's seriously heavy, even without the rails or Y-car.

Up next is welding the Y-car, and then the table gets put together right-side-up.
Attached Images
File Type: jpg welding_gantry.jpg (39.0 KB, 956 views)
Reply With Quote
  #79  
Old Mon 31 January 2011, 20:59
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
Y-Car Welded

With Camille helping, I got the y-car clamped and square, sitting on the table saw. We ended up using a block of wood inside the car to keep the end plates exactly vertical. Also, the bends were a little bit off, so the large bar clamps are to bring the corners together for welding.

I'll work on grinding the welds a bit later. Tomorrow, it's full steam ahead to get the table standing.
Attached Images
File Type: jpg ycar_clamped_1.jpg (39.5 KB, 905 views)
File Type: jpg ycar_clamped_2.jpg (40.3 KB, 906 views)
File Type: jpg ycar_welded.jpg (27.8 KB, 907 views)
Reply With Quote
  #80  
Old Mon 31 January 2011, 21:15
smreish
Just call me: Sean - #5, 28, 58 and others
 
Orlando, Florida
United States of America
Yep. That looks about right.
Reply With Quote
  #81  
Old Tue 01 February 2011, 04:33
Robert M
Just call me: Robert
 
Lac-Brome, Qc
Canada
Send a message via Yahoo to Robert M Send a message via Skype™ to Robert M
Hey neighbor, nice progress !!
Reply With Quote
  #82  
Old Mon 07 February 2011, 13:15
camilleg
Just call me: Camille
 
Urbana, Illinois
United States of America
Melissa's working too hard to post updates, apparently. Be assured that the table is now standing, no bolts, all welded. She's not coming apart again. (Are Mechmates He or She? Boats are She, but they have way more feminine aspects than Mechmates.)

Last edited by domino11; Wed 13 August 2014 at 10:09..
Reply With Quote
  #83  
Old Mon 07 February 2011, 23:00
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
If you spend more time with your MM than with your wife, then the MM is a She.
Reply With Quote
  #84  
Old Sun 13 February 2011, 12:16
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
First, the table bolted together and leveled, prior to welding. Also, three photos of welding the cross-brace assemblies to the table legs.
Attached Images
File Type: jpg table_bolted_before_welding.jpg (43.9 KB, 752 views)
File Type: jpg welding_1.jpg (44.1 KB, 752 views)
File Type: jpeg welding_2.jpeg (21.2 KB, 746 views)
File Type: jpg welding_3.jpg (17.8 KB, 747 views)
Reply With Quote
  #85  
Old Sun 13 February 2011, 12:27
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
cross-bearers in snow

With all the winter pollen we've been having up here in Canada, my MM's cross-bearers got completely buried in front of the workshop.

I had to dig them out and bring them inside to dry off before cutting and drilling. Fortunately, after a few days of dripping all over the workshop floor, they're mostly dry now.
Attached Images
File Type: jpg cross_bearers_in_snow.jpg (27.2 KB, 761 views)
File Type: jpg cross_bearers_dug_out.jpg (26.6 KB, 754 views)
File Type: jpeg cross_bearers_at_workshop.jpeg (43.6 KB, 758 views)
File Type: jpeg cross_bearers_at_workshop_2.jpeg (40.7 KB, 755 views)
Reply With Quote
  #86  
Old Sun 13 February 2011, 12:37
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
The x-rails were bolted on yesterday, in preparation for drilling the main beams. We used the rail off-cuts to clamp an alignment wire along the length of the table.

Not wanting to go shopping for just a bit of wire, I used a length of .030" MIG welding wire. It's a bit difficult to handle and tension well (and risky, prone to poking an eye out ), but was accurate enough for this stage of assembly.
Attached Images
File Type: jpg rail_alignment_1.jpg (31.7 KB, 761 views)
File Type: jpeg rail_alignment_2.jpeg (37.3 KB, 758 views)
Reply With Quote
  #87  
Old Sun 13 February 2011, 14:03
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
More photos, from my dad's camera.

Setting up the table, right side up. We hoisted one side, and braced it with 2x4 lumber. Each lumber joint was clamped and screwed together for safety. A rope at the bottom kept each frame from slipping out.

We also clamped a block of wood to the main beam, to give a predictable offset from the wall. This way, we could hoist the side and just push gently until it touched, rather than fussing with a tape measure while things were lifted.
Attached Images
File Type: jpg first_side_braced.jpg (36.7 KB, 753 views)
File Type: jpg table_partly_standing.jpg (31.1 KB, 750 views)
File Type: jpeg beam_wall_offset.jpeg (20.9 KB, 756 views)
Reply With Quote
  #88  
Old Sun 13 February 2011, 14:07
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
Setting up for drilling the x-rails to 1/4". Two sawhorses on each side of the drill press allowed the rails to slide back and forth the full length. We used a laser level in the drill-press vise to set them all to the correct height.
Attached Images
File Type: jpg x_rail_setup.jpg (44.3 KB, 762 views)
File Type: jpeg x_rail_setup_2.jpeg (33.3 KB, 759 views)
Reply With Quote
  #89  
Old Sun 13 February 2011, 14:16
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
Drilling Main Beams

I drilled one hole in the main beam with a handheld drill, before giving up and looking for a better solution.

Others have used small drill presses to drill the beams, and it works like a charm. The only hard part is coming up with a stand that's stable and portable. We adapted a roller stand normally used for a table saw.

Note the piece of plywood clamped against the beam -- this worked great to keep the metal shavings and cutting oil from flying all over the place.

The last photo gives an idea of just how LONG this table is .
Attached Images
File Type: jpeg drill_press_1.jpeg (23.1 KB, 757 views)
File Type: jpeg drilling_main_beams_2.jpeg (40.3 KB, 756 views)
File Type: jpeg drilling_main_beams.jpeg (44.4 KB, 753 views)
File Type: jpeg drilling_main_beams_3.jpeg (35.1 KB, 757 views)
File Type: jpeg long_beam_to_drill.jpeg (39.5 KB, 752 views)
Reply With Quote
  #90  
Old Sun 13 February 2011, 14:18
melissa
Just call me: Melissa #83
 
Brighton (Ontario)
Canada
First Accident

We've tried to be very careful when working around the MM so far. Well, yesterday, it finally happened.

We drew blood . Fortunately, it was only on the whiteboard .
Attached Images
File Type: jpg drawing_blood.jpg (13.3 KB, 761 views)
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
dust collector capacity gorantec 55. Dust Management 15 Thu 19 November 2009 19:24
Dust foot and custom clamps done #3 - Conway, AR Doug_Ford MechMates already cutting 195 Mon 13 October 2008 20:27
Dust collector foot Marc Shlaes Dxf Library 7 Sun 27 April 2008 19:18
Dust Collector Foot Doug_Ford 55. Dust Management 34 Fri 04 April 2008 10:01
Dust collector foot Art 55. Dust Management 5 Sun 17 June 2007 13:09


All times are GMT -6. The time now is 12:38.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.