MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Personal Build Histories > Construction started, but not cutting yet
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Sun 27 February 2022, 14:42
woodibe
Just call me: ibe
 
dakar
Senegal
PROBLEM with 10 10 332 S

hello
I have a problem with the plans 10 10 332 S I read on the C of 180mm 2 cut of 3083mm but how is this possible with an angle of 60° it is too short it s ok with 2 angles of 45° there is necessarily something I don't understand? thank you for enlightening if you have been confronted with this reflection

Last edited by woodibe; Sun 27 February 2022 at 15:12..
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with slaved axis MK_CATANZARO Troubleshooting 4 Fri 02 January 2015 10:58
Settings problem??? ilmataat 70. Control Systems 11 Mon 15 July 2013 22:05
Push Button Problem hflwaterski 70. Control Systems 10 Sat 14 January 2012 21:12
shutdown problem paul60 Troubleshooting 13 Wed 30 December 2009 04:42
Rack is bowed - is it a problem? KenC Driving Mechanisms: Rack/pinion, gears, screws, belts & chains 5 Mon 14 December 2009 10:54


All times are GMT -6. The time now is 11:47.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.