MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Computing, Software & Programming > 80. Computer Hardware & Software
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools
Old Thu 30 January 2014, 20:42
Just call me: Ross #74
Wireless Controller Software Alternative

Hi all

I have been corresponding with Robert about the Logitech Wireless RumblePad Controller.
The Logitech Profiller software occasionally made the gantry move without it being requested on startup.
Typically it was a short move that could be counter acted with the controller.
It was easily settled on a restart.

Anyway with further testing I found that the wired F310, the wireless Rumblepad2 and the wireless F710 all had the same quirk.
This is obviously a software issue not a hardware issue.

I then searched for alternative software and came across the software.
It is $11 AUD for the software and it keymaps very nicely to control the Mechmate.
Using this alternative software all unrequested movement problems have now gone away.
Occasionally the Z axis won't move, but simply switching the focus to the Xpadder software and actuating the buttons always seem to get it moving again.
There are green indicator lights on the software interface that show when a button is being pressed, so it is very easy to tell if the software is registering the keypress.

So if anyone cares to test the software and give some feedback I would appreciate it.
Also if anyone has further suggestions about good, controller model non specific software also feel free to chip in.

Reply With Quote
Old Thu 30 January 2014, 20:58
darren salyer
Just call me: Darren #101
Wentzville mo
United States of America
interesting. I may raid my sons gaming area.
Reply With Quote

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Setup document "Mach3 CNC Controller - Software Installation & Configuration" Gerald D CNC motion control software 4 Fri 08 January 2010 10:34 for 3d scanners, CAD software, CAM software, and Desktop Mills awerby The Market Place 7 Mon 04 May 2009 08:23
Wireless (print server) Control Box ? kanankeban 80. Computer Hardware & Software 4 Wed 25 February 2009 17:14
Is this wireless keyboard okay? javeria Human Interface Devices (HID's) 3 Tue 10 February 2009 06:17
Alternative for grinding rails... dmoore Archives 19 Wed 04 June 2008 04:58

All times are GMT -6. The time now is 23:04.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.