MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Personal Build Histories > Construction started, but not cutting yet
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #31  
Old Sat 30 March 2019, 08:14
bachaabdelkabir
Just call me: Abdelkabir
 
Casablanca
Morocco
Thank you again Robert

I will focus my effort to find a solution for this !
Reply With Quote
  #32  
Old Mon 20 May 2019, 00:34
bachaabdelkabir
Just call me: Abdelkabir
 
Casablanca
Morocco
Hi all,

Finally, I am back again to work in the machine, so I taught I would share some of the advancement.


--> I found a solution for the previous problem of the damaging that was happening to the V-groove wheels bearings. As it turned out that this was due to fabrication tolerance. In fact no matter how careful is the method of the insertion of the bearing, once it is inserted it stops turning smoothly. So i grinded the inside of the wheel a little bit with a Dremel tool using a sanding bit. Then I applied some Loctite glue and the problem was gone.


-> I redid one of the X rails as it was a little bit out of tolerance. For that, i bought a melamine white panel as Guille and Mike adviced in previous posts.

--> transferred the holes from the old rail to the new one.

--> I also welded the Y-car.

I have now a rolling X and Y axis. Here you go a link to a video showing the advancement
https://youtu.be/lYa0f33XdGE

Best regards.

And here are some pictures :
Attached Images
File Type: jpg Y-car1.jpg (179.6 KB, 6 views)
File Type: jpg Y-car3.jpg (180.7 KB, 6 views)
File Type: jpg Y-car2.jpg (155.3 KB, 6 views)
File Type: jpg x_rails_hole_transfer_2.jpg (153.4 KB, 6 views)
File Type: jpg x_rails_redid.jpg (128.6 KB, 6 views)
File Type: jpg overall.jpg (140.9 KB, 6 views)
Reply With Quote
  #33  
Old Mon 20 May 2019, 05:15
jhiggins7
Just call me: John #26
 
Hebron, Ohio
United States of America
Nice progress, motion looks smooth.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Kitchen Table Project Underway !!! - Suffolk, UK sphericos Construction started, but not cutting yet 16 Thu 27 April 2017 20:47
Mirror frame javeria The Show Room 12 Fri 14 December 2012 17:10
New to CNC. Reading and planning underway! Benchley Introduce yourself and start planning 9 Sat 13 March 2010 06:09
Education Underway - Garner NC USA TURBObuck Introduce yourself and start planning 21 Wed 10 March 2010 15:24
Frame for Oil Painting Khalid Archives 2 Sat 18 July 2009 10:55


All times are GMT -6. The time now is 07:48.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.