MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Archives
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Closed Thread
 
Thread Tools
  #1  
Old Thu 06 March 2008, 06:19
Oleks
Just call me: Oleks
 
Poltava
Ukraine
Servo gear + motor requirements & sources

It happens I've got servodrivers (24-200V, 1-12A capable to turn DC, BLDC, AC no hall sensors needed) and now looking for suitable gear + motor (and prices ) combinations. After many days searching web sites with open prices and worldwide delivery not much was found: BLWS233S-36V-4000 NEMA23 36V 100oz*in-peak 15A (actually here) with 1:10 gearbox (backlash <12 arc-minutes) will give some 750 oz*in output. Is it enough 90W motor to move (and accelerate) 75kg gantry to 0,38 m/s (with smallest pinion)? They have another - 180W motor, but at 22A (wired delta) - exceeds the driver's limit. Could wiring it star make it suitable?
Other big question - what maximum backlash may have whole driving mechanism with servo control based on rotary encoder? They have 400W motors with spur gears.
I just wonder if stepper gearmotors for $280 exist then good enough servo + gearbox under $400 also... It's so pity guys from China like to be mailed with inquiry, so lot writing awaits. May be somebody already knows the place?
  #2  
Old Wed 12 March 2008, 10:49
Oleks
Just call me: Oleks
 
Poltava
Ukraine
This spreadsheet can answer some qustions
Attached Files
File Type: zip MotorSizer.zip (4.7 KB, 75 views)
  #3  
Old Wed 12 March 2008, 13:16
Doug_Ford
Just call me: Doug #3
 
Conway (Arkansas)
United States of America
Oleks,

I'm sorry no one has answered your questions but this board is really oriented toward building the Mechmate using stepper motors. Normally, we don't talk about much else. Sorry. If you ask your questions over at CNCZone, someone might be able to help you. Good luck with your machine.
Closed Thread

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 17:50.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.