|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
|
Thread Tools |
#1
|
|||
|
|||
Here's my lastest dust foot pic and model. It's fabricated from PVC.
|
#2
|
|||
|
|||
Nice Greg.
Maybe I will get to actually hooking up all my dust collection next week after moving the machine. This should be a fun week for sure! |
#3
|
|||
|
|||
Greg,
Very nice. I hope that I can worry about dust collection soon. |
#4
|
|||
|
|||
Yea, it is interesting to see how many ways there are to accomplish the same objective. I like the way yours works. How did you make the hinge? Are you a skype member?
|
#5
|
|||
|
|||
Yeah the hinged one reminds me of that truecnc one (do I dare mention that here?) JR great work what material is the foot made out of?
|
#6
|
|||
|
|||
The hinge is a round outer profile with a step cut into it. A hole is drill thru the two half's for a #10 screw.
Yes, I'm a skype member. I meant to respond last night, but I was playing with some inlay work. This MM is amazing. The detail is phenomenal and the ease with fabricating inlays is almost too easy. |
#7
|
|||
|
|||
Greg, does your dust foot move up and down with your router on the Z-axis? Or, is the dust foot set at a fixed height based on the material you are cutting? I think this was answered in another post by someone but I can't seem to find the post.
|
#8
|
|||
|
|||
David,
The dust foot is attached with 4 #8 screws and Nyloc's to the router bracket. It moves with the Z axis. |
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
Thread Tools | |
|
|