#1
|
|||
|
|||
#57 and future plans.
#57 here. Finished my machine in April 2010 and its been serving me well.
But after many programs and project Ive finally come to the conclusion that my 2750x1630mm will be cut down to maybe tops 1500x1630. Never really used full area and I would like to fit more items on the same space. Plus im giving it a table conversion to be able to use coolant without having to replace spoilbords everyt so often. Idea is to add a new pair of legs aprox where the cut will be, then just cut it down and dragging the scrap out cut down into smaller pieces. the rest of the machine will self-support due to having the new leg added. So in short, shorten the machine. Anyone have a similar rebuild to share, pictures etc? |
#2
|
|||
|
|||
Hi.
You can use the mid table for wood and the another mid table for plasma cutter. A head conversion is needed but nothin complicated. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Olivier Verdier, future CNC builder in France | Oliver Verdier | Introduce yourself and start planning | 1 | Sat 05 January 2019 15:01 |
hello, a future mechmate in france (tarn) | athanase81 | Introduce yourself and start planning | 8 | Wed 03 July 2013 12:43 |
Hello, A mechmate future TUNISIA | Hedi Shaba | Introduce yourself and start planning | 9 | Fri 04 June 2010 04:49 |
Dreaming a future mechmate | isladelobos | Miscellaneous / General / Whatever / Catchall | 6 | Sat 20 December 2008 05:34 |
The hardware interface between PC and motor drives - the future beyond parallel BOB? | Gerald D | 70. Control Systems | 16 | Mon 10 December 2007 11:09 |