MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Common Assemblies & Parts > Rails & Rollers
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Fri 28 June 2013, 04:49
KenC
Just call me: Ken
 
Klang
Malaysia
Aluminum Extrusion V-Rail for MechMate - RailMate

Hi Guys,

Sometime ago, Gerald called for a custom rail specifically for MechMate use, the though stuck in my head...

Lately, I got involved in work which requires some custom aluminum extrusion,

Got me thinking... (which is a bad bad thing...)
What if we extrude some 6061-T6 rail angle, anodize the damn thing, use plastic wheel (since there are more than a few reported success stories amongst some MechMaters)
While we are at it, mark out a groove for easier drilling job & fishing-line alignment trick...

BUT!!!! Tooling $$$

How nice if we can spread out the tooling cost...

Would anyone be interested? I need a poll of some sort before I could proceed

attached is a little something which I scribbled on the run.
Comment freely, I intend to do a Open Source project out of it
RailMate-Model.jpg

Last edited by KenC; Fri 28 June 2013 at 04:58..
Reply With Quote
  #2  
Old Fri 28 June 2013, 05:31
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Ken, I wouldn't bother with the grooves because you will spend more time explaining the grooves than selling the rails. The application should be much wider than just for MechMates.

Hard anodising with a plastic roller should give excellent life. It is amazing how hard a skin can be put onto alu. (Think of steel grinding discs that basically consist of alu oxide)

The cost of shipping is normally the killer for this type of project. The length has a big influence on the shipping costs. Once people accept that rails can be butt-jointed, the shipping becomes much easier.
Reply With Quote
  #3  
Old Fri 28 June 2013, 06:03
KenC
Just call me: Ken
 
Klang
Malaysia
Agree with the grooves, can do with or without.
Shipping length is below 1.8m or about 6ft... price sore exponentially above that, but if you don't mind snail mail, the cost for 6m length or longer is totally bearable.
I'm not worry about the weight, its 3 time ligher than steel...

There are 2 ways to butt join,
1) Mill the ends to perfect square or at least let them tilt the same angle. Its trivia job if one can get access to a run down milling machine with a solid machine vice.

2) Dirty trick butt join
Dirty trick butt joint.jpg
As shown in the attach pix, I over exaggerated the angle, normally you won't cut that badly on a chop-off saw. as long as you intentionally make your cutting error arranged as such, you have no problem bit jointing the V center-line. the mounting screw will hold the rail position exactly as intended after shimming...

BTW, I butt join my steel angle rail, MM never notice the little notch at the joint...

Last edited by KenC; Fri 28 June 2013 at 06:07..
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
mm parts made of aluminum? cordell General - MM Build 6 Sat 14 August 2010 13:02
Aluminum Minigun Parts Jayson The Show Room 6 Fri 07 May 2010 05:20
Best R+P combo for precision aluminum cutting Stepinwolf Driving Mechanisms: Rack/pinion, gears, screws, belts & chains 7 Thu 07 January 2010 21:07
Aluminum Airplane Control Panel on a Mechmate! Jayson The Show Room 9 Tue 21 July 2009 04:51
Aluminum vs. Steel Gerald D 10. Base Table 0 Wed 18 July 2007 01:52


All times are GMT -6. The time now is 08:02.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.