|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
|
Thread Tools |
#1
|
|||
|
|||
Small Parts that keep You from building a MM
What are some of the small parts that are not "Laser Cut" that are keeping you from building a MechMate?
My Father-in-law has a metal fabrication shop! If I can accrue a list of parts that people don’t have the means to machine, I can see if any of his workers would be interested in a side job. This was a problem for me. Thank God for My father in law!!!!! This is just an idea I had. Joe |
#2
|
|||
|
|||
Joe, for a start, have a look at the drawings with "T" as the process.
|
#3
|
|||
|
|||
Joe,
Look at the router bracket. I purchased a router bracket for a Milwaukee router. It cost me more than a standard router because of the refinement screw. I have since removed the screw from the router and I could have used a generic bracket that would fit the Milwaukee motor. I would like to have a place to put the laser on the right side. If you could bring the price down, you would have a market. Look at M1-20-220. I found some thing that will work but a reasonably priced support bushing. |
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
Thread Tools | |
|
|