#1
|
|||
|
|||
Touch probe - $99
I have a great touch probe I sell for $99.
Shipping is $7 in the US, most others are $10.40. You can see my probe and pictures at http://www.machsupport.com/forum/ind...ic,5004.0.html I have limited production capability but can usually ship with a day or 2. The probe is convertable from 3d touch probing to a tool height setting pad. To order email me for availability and send paypal to aminear@wyomingwireless.com Thanks Arnie |
#2
|
|||
|
|||
I purchased one of Arnie's probes. Nice product.
Had the probe connected in less than 1/2 hour. Mach already has a digitizing pluggin (free). Had a 7,000 + point cloud in about 1 hour. I'm using Rhino 4.0, which has a Pluggin (Rhino Point Cloud, $295) that makes a surface from point clouds. I have always wanted to do reverse Engineering this way. Way cool . |
#3
|
|||
|
|||
Quote:
Nice to see you here. I'll definitely order one when i finally get my build complete. |
#4
|
|||
|
|||
Thanks for the replys, and the nice comments.
I will check on that URL on my brochure. |
|
|