MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Miscellaneous hardware and software > Miscellaneous / General / Whatever / Catchall
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Thu 22 May 2008, 12:59
dmoore
Just call me:
 
Alternative to Mach3 and Breakout Board using USB

Ran accross this when researching something else... It's a 5 axis controller (no drivers/motor controllers) with all the standard breakout board inputs and outputs. It's priced at $275 USD, $329 Euro. It includes a CNC controller software (like Mach3) along with the hardware, so you are paying about $100 for the hardware. Specs are:

Inputs:
Emergency stop
5x End of stroke for homing
Probe
Handwheel input
Pause
Run
USB (V2.x) from PC/Laptop

Outputs:
5x Step / Dir / amplifier enable
Emergancy Stop
Flood coolant
Mist coolant
PWM
TOOL Direction
AUX1

Max step frequency:
75 KHz step frequency,
5 Axes
Pulse width 5 uSec and up

Others
PICstep compatible
All IO buffered and filtered

Software screen photo:








Board photo:


http://www.usbcnc.com/index_products.html#cpuv4
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:38.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.