MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > After Building the Beast - Operating , Troubleshooting and Maintenance > The Show Room
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Tue 14 June 2011, 00:46
kaartman
Just call me: Koning #20
 
Abu Dhabi
United Arab Emirates
Large lithophane

I made this lithophane 1200mm x 900mm for the Apache helicopter squadron
carve time 32hrs, 60 deg 12mm V bit, feedrate 35mm/sec, 600 bright LED`s, 6mm corian, max cut depth 5.33mm.

I made the commanders picture board a week later, falcon Z 40mm wing span 110mm top of the helmet to bottom of chest 450mm
Attached Images
File Type: jpg 1.JPG (10.7 KB, 1176 views)
File Type: jpg 2.JPG (9.0 KB, 1176 views)
File Type: jpg 3.JPG (8.6 KB, 1177 views)
File Type: jpg 4.JPG (148.6 KB, 1180 views)
File Type: jpg 5.JPG (106.0 KB, 1178 views)
Reply With Quote
  #2  
Old Tue 14 June 2011, 03:50
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
The King (Koning) rules! Welcome back with that great job!

(I think you have some mix-up with sizes - maybe the falcon wingspan is 1100mm?)
Reply With Quote
  #3  
Old Tue 14 June 2011, 06:17
baseball43v3r
Just call me: John #96
 
Glendora (California)
United States of America
Koning, very nice projects! what is the material you used for the lithophane?
Reply With Quote
  #4  
Old Tue 14 June 2011, 07:49
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
Long time nothing and then suddenly VERY NICE stuff... did you practice all this time ?

Groetnis, Kobus
Reply With Quote
  #5  
Old Tue 14 June 2011, 14:45
domino11
Just call me: Heath
 
Cornwall, Ontario
Canada
Very Nice! Welcome Back!
Reply With Quote
  #6  
Old Wed 15 June 2011, 03:32
kaartman
Just call me: Koning #20
 
Abu Dhabi
United Arab Emirates
Thank you, I am happy to be back, on the forum and at home, I have been working in Saudi for more than a year. I had to replace the waterpump for the spindel cooling, vacuum the spider webs from the control cabinet and it is all going forward-backwards and up/down.

There is a bad noise on the A drive stepper motor, will need to look into that. I will start with the upgrade-indexer.
Reply With Quote
  #7  
Old Wed 15 June 2011, 22:45
hennie
Just call me: Hennie #23
 
Roodepoort JHB
South Africa
Nice,It is amazing how some of the members come back on the forum after a while and then show some very nice stuff.Welkom terug.
Reply With Quote
  #8  
Old Thu 14 July 2011, 01:31
kaartman
Just call me: Koning #20
 
Abu Dhabi
United Arab Emirates
Carved frame with lithophane

This is to show one of my latest projects that I completed using Aspire, This is a lithophane of Sophus Falck, he is the father and founder of the happy family that I am working for ... Falck
http://www.falck.com

The editing of the picture took some time, it was very grainy and not suited for a lithophanes, I received the picture of the ’R’ button on his uniform from Falck museum in Denmark as a sample text that I wanted to carve on the frame, I did not found a font to match the ‘R’ I decided to create my own font based on the ‘R’ so the font to carve the letters is all my work.
Top of the frame is carved REDNINGSKORPSET (rescue corps)
1) Material: bright white solid surface material, thickness 6mm max carve depth 5.33mm finish size 473mm x 293mm
2) 60 deg V bit http://www.cmtutensili.com/show_item...s=RB~7/8/958~2 no rough pass, direct finish path
3) Wood - beech light
4) Frame size 420mm x 604mm x 25mm
5) Rough pass 6mm ball end
6) Finish Pass 2mm ball end
Time spend on this project ---- way to much to be profitable
Attached Images
File Type: jpg frame litho .JPG (96.2 KB, 918 views)
File Type: jpg back lit.JPG (43.0 KB, 917 views)
File Type: jpg Frame closeup.JPG (131.3 KB, 918 views)
File Type: jpg Uniform R.JPG (77.3 KB, 918 views)
Reply With Quote
  #9  
Old Thu 14 July 2011, 01:41
KenC
Just call me: Ken
 
Klang
Malaysia
Very nice!
Reply With Quote
  #10  
Old Thu 14 July 2011, 06:37
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
Mooi man
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Need a HI-Rise photo of a large size working MM Stepinwolf General - MM Build 0 Sun 25 July 2010 10:00
AC motor & VFD used with Mach3 in large CNC stone cutting system osman100 70. Control Systems 39 Sun 17 May 2009 09:16


All times are GMT -6. The time now is 10:13.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.