MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Personal Build Histories > Construction started, but not cutting yet
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Thu 14 July 2022, 16:15
greuterfarms
Just call me: Tim
 
Tn
United States of America
The easy part is done in Tennessee!

I started this build a few months ago. It's not a MechMate per say, but I incorporated a lot of MechMate concepts into the build. I used materials I had laying around the farm for the framing and just engineered the build around those materials. The machine capacity is 5'x20' with a 5'x10' vertical table on one side. I will be using this cnc to surface and tongue and groove oak slabs (60"x96"x2-1/2") that I'm using for flooring in my log cabin. I will also be machining two sets of heavy timber stair stringers (4"x14"x18') and all the cabinets for the cabin. I bought a 7.5KW Air Cooled Spindle and VFD, 4 STEPPERONLINE Nema34 12Nm Closed Loop Stepper Servo Motor Hybrid Driver Kit, 4 Nema 34 Planetary Gearbox Speed Reducer Gear Head 5:1 and a DDCS-EXPERT+MPG offline controller. Now the hard part of figuring out how to run the controller begins.

281920040_386381653512551_2492897009600179618_n.jpg

293119582_373002478191887_2716842918699497314_n.jpg

292974650_474498137924102_7445629022956283517_n.jpg

292885822_3431307487103461_1498381526164322080_n.jpg
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fire, how easy it is to start one! smreish 55. Dust Management 8 Sun 10 October 2010 20:22
Easy way to get a cyclone if you..... Regnar 55. Dust Management 4 Fri 24 September 2010 21:23
Easy Torroidal Transformer Mitch_1 702. Power Supplies 2 Sat 07 November 2009 05:52
Timing pulleys made easy stcnc The Market Place 0 Mon 08 September 2008 15:02


All times are GMT -6. The time now is 17:29.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.