MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Structure & Mechanics > 50. Toolheads
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Mon 20 October 2014, 16:36
Duds
Just call me: Dale
 
Canberra
Australia
Adaptor plate or direct mount air spindle?

Hi folks, I have a cheap air cooled spindle. The motor just has has a massive aluminium extrusion that it is pressed into. It has a matrix of tapped mount holes but I'm tempted to just drill the two holes for the dowel pins and fit a stud for the through hole mount on the z slide.

Or, should I create an adaptor plate with matrix of screws to hold the spindle and dowels and stud for the z slide.
Reply With Quote
  #2  
Old Mon 20 October 2014, 20:37
servant74
Just call me: Jack
 
Nashville (Tennessee)
United States of America
Best guess

My best guess, and what I would do, but you must make your own decision [sorry, software guy so weasel words are required] ...

My suggestion is, if you think you might want to swap spindles, put it on a mounting plate so you could swap spindles (to router, air-drill, other spindle, etc), is the best and most flexible solution.

If you are only ever going to use this one spindle and don't plan on ever changing, mount it directly, to save a little cash.

Still, preferred method would be mount it to a replaceable mounting plate, IMHO.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Plasma - direct drive - Gilbert Arizona Vern2 Miscellaneous / General / Whatever / Catchall 61 Tue 02 August 2011 09:20
Quick release plate for spindle ... silverdog 50. Toolheads 2 Sat 18 December 2010 09:04
2.2kw Spindle Mount??? ahe_1990 50. Toolheads 6 Sun 19 September 2010 23:19
Direct motors 4Nm and 6,8Nm tomasptacek Motors & their mountings 0 Wed 26 May 2010 03:25
how do I mount a router base to the z plate? kanankeban 40. Z-Slide 2 Fri 06 March 2009 02:43


All times are GMT -6. The time now is 10:51.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.