|
|
|||||||
| Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools |
|
#1
Sun 06 July 2008, 06:24
|
|||
|
|||
|
Dremel holder
This is a holder I made for a dremel.It is stack plywood .With a micrometer it is easy to take mesure of the diameter of the tool every .75 inch and make a plug the size of a router that will fit in the tool holder. When I carve I do the rough with a regular router and a larger bit. Then I switch to the dremel and smaller bit for the very long finishing pass. The bit are cheap and it is quieter.
Normand Blais 
|
|
| Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
| Thread Tools | |
|
|
