|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
|
Thread Tools |
#1
|
|||
|
|||
Does a generic freeware replacement for AutoCAD exist yet?
Hi Guys
Greetings from the land of the lazy . . . . it is now really time to hang up the hat and quit my day job in the waste industry. Looking forward to my last daily commute of 60 miles and just pottering about from home. (turned 61 this year). Looking for stuff to keep me occupied, and CAD from home is definitely on the cards. But I won't pay for AutoCAD. (yes, I know it can be copied *free* but want to consider legal options available today). I might run classes for the older guys in my neighborhood who want to convert from pencil to CAD and that must be on a CAD system than can be publically advertised and endorsed. (Our city now requires building plans to be submitted electronically and that has caught the older architects on the wrong foot) So, are there any generic freeware AutoCAD lookalikes out there today? (I still only work in 2D with very basic commands - which is fine for teaching newbies to CAD) |
#2
|
|||
|
|||
This one comes to mind.
Never used it though http://www.sketchup.com/ Some on here to look at http://www.hongkiat.com/blog/free-cad-software/ Last edited by lonestaral; Thu 20 October 2016 at 01:25.. Reason: Add other link |
#3
|
|||
|
|||
Draftsight is free as an Autocad replacement, used it for a while until I got a free licence for Autocad 2016. Also, while not CAD per se Fusion 360 is a great tool to creating stuff in plus it has CAM features as well.
Enjoy your retirement Sir, you have well earned it. |
#4
|
|||
|
|||
Yes, Draftsight has been the most recommended AutoCAD clone for several years now.
|
#5
|
|||
|
|||
Thanks guys
Posting here has brought back lots of memories! |
#6
|
|||
|
|||
Hello Gerald !! Hope all is well.
I have used and like solid edge 2D. https://www.plm.automation.siemens.c...d-edge/free2d/ |
#7
|
|||
|
|||
Had a look at SolidEdge 2D, very nice, Parametric too! Have downloaded it to give it a go for basic Cad duties, Thx Mike!
|
#8
|
|||
|
|||
I will add another vote for draftsight. I did CAD design on ACAD starting at version 8 and stopped using it altogether sometime around version 14. The think I really like about draftsight is it's command compatability with ACAD. All the single letter shortcuts I used to use in ACAD work in draftsight. The only real weakness it has is it does not have any proper 3d capability but for 2d drafting I have found it the most productive solution for me.
|
#9
|
|||
|
|||
I am being stumped by a well-known registration problem for DraftSight 16. See:
https://forum.solidworks.com/thread/84937 |
#10
|
|||
|
|||
Gerald - Do you have your PC set to allow pop-ups for that site?
|
#11
|
|||
|
|||
If your setting this up on a laptop, try going to another location. ISP may be blocking something.
|
#12
|
|||
|
|||
Popups are off, privacy is off, location enabled. At 2 different computers at 2 sites with 2 ISPs.
|
#13
|
|||
|
|||
Hello Gerald, welcome back plus happy retirement, have a look at Delta Cad @30 USD
|
#14
|
|||
|
|||
I like that DraftSight, set to Classic mode, gives me the same look and feel as AutoCAD. Having used AutoCAD daily for about 30 years, I use it without thinking. I have successfully taught AutoCAD to many people, but it isn't an affordable system out here where minimum wage is about $4 an hour. I can teach AutoCAD, or an exact equivalent . . . . I don't want to learn another CAD just for the sake of teaching it.
|
#15
|
|||
|
|||
I have used draftsight for a few years and never had an activation issue but there are a couple of things that come to mind and may be worth trying if you have not already.
1) Turn of the windows firewall if on whilst trying to activate. 2) Make sure the user you are logged in as has full admin rights. |
#16
|
|||
|
|||
I started with Autocad however now I do everything in Rhino. Easy to pick up if you already know Autocad and it can export to most of the known popular most expensive systems. I bought it straight from McNeel however it can be gotten for less from distributors like Novedge.
|
#17
|
|||
|
|||
You should look at http://freecadweb.org/
|
#18
|
|||
|
|||
You should also look at Fusion 360
http://www.autodesk.com/products/fusion-360/overview Web based and free to most users |
#19
|
|||
|
|||
Thanks for the links...!!
|
#20
|
|||
|
|||
Hi, I just thought I would update this as I used to use Draftsight for 2d CAD but due to a change in their license policy it is no longer going to be free and will no longer activate once the current year expires. I liked it as it was simple to use and command compatible with AutoCad, it felt similar to Acad 12 but with only limited 3d capability.
I am now using nanoCAD and I am quite impressed it is lightweight and not cloud based. I use Fusion 360 and sketchup but sometimes I want a simple drawing and dimensioning tool that does not need to talk to a server in another country. It is also command compatible with Autocad so if you are used to one letter shortcuts they still work. |
#21
|
|||
|
|||
Hey Fellas's
I highly recommend Draftsight! https://www.3ds.com/products-service...ad-draftsight/ I use it daily. Also has a gcode plugin for those interested. |
#22
|
|||
|
|||
Yes I liked Draftsight too but as I mentioned the free version has been cancelled and will no longer work after this year. The cheapest version they have is £79 per year if you want the g code plugin it is £159 per year. Fusion 360 is free for a lot of people does 3d and gcode and so there is not much incentive to buy draftsight.
If you want an autocad clone 2d CAD package that works offline though nanocad looks hard to beat right now. |
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AutoCAD vs Rhino vs DesignCAD, and DXF to G-code converters | Sean_D | Graphics & CAD | 115 | Sun 13 May 2012 19:52 |
Killing duplicate lines in AutoCAD | Gerald D | Graphics & CAD | 5 | Fri 09 March 2012 18:15 |
Spindle Bearings replacement | CAM Craft | 50. Toolheads | 40 | Mon 03 August 2009 05:46 |
Generic Aussie (Leadshine) Stepper Motors are they OK? | Jama | Motors & their mountings | 5 | Tue 23 December 2008 09:05 |
Ace Converter (opensource freeware) | Gerald_D | CAM | 2 | Sat 13 December 2008 00:28 |