MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Electrical & Electronic > 701. Motor Drives
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Fri 01 October 2010, 23:03
chrisd7306
Just call me: Chris
 
Melbourne
Australia
Complete manual for Chinese VFD

For those who have the Chinese VFDs, I have found a complete manual for these devices, with error code explanation, recommended brake resistor for each size of VFD, setup procedures, etc.....

I have only found extracts from this manual but never a complete listing.

I had a quick look through the MechMate/cnczone sites but could not find a complete copy. If there is already a copy available, could the administrator please delete this thread.

Cheers
Chris
Attached Files
File Type: pdf A_F_M_H_Series.pdf (1.56 MB, 233 views)
Reply With Quote
  #2  
Old Sat 02 October 2010, 07:09
PEU
Just call me: Pablo
 
Buenos Aires
Argentina
this one does not look like the huanyang VFD thats popular with the cheap spindles, the command set and instructions are the same?
Reply With Quote
  #3  
Old Sat 02 October 2010, 17:17
PEU
Just call me: Pablo
 
Buenos Aires
Argentina
Ken sent me the document, I converted it to PDF and now it can be attached to the post. This one looks like it is the manual for the HuanYang VFD.
Attached Files
File Type: pdf HuanYang VFD user manual.pdf (705.6 KB, 204 views)
Reply With Quote
  #4  
Old Sat 02 October 2010, 18:20
chrisd7306
Just call me: Chris
 
Melbourne
Australia
I have this copy but the last 2 sections are missing the information I needed.
I compared the index of both copies and they are identical.
There is a variation in the command listing, there has been a shift in command numbering. The command explanation are the same but the numbering is different and the prefix is changed from PD to CD.

If I remember I got this document from one of the links from the Huanyang web site links in China. It was about a year ago and I cannot find the link I used - there has been so many with this mechmate project!!!!!!!!

By using both copies of the documentation we might be able to get a better understand of this device and get the best out of it. On reading about this VFD, there is so much more that it can do than just control the speed of rotation and convert single phase to 3 phase.

One command I think that could be useful is the ramping up the speed over a period of time. Could be used for the warming up period before using it for the day. Also there is a ramping down of speed for cooling the spindle down at the end of the days work. If I remember from my engineering study days that both warming and cooling are important to bearing life.

cheers
Chris
Reply With Quote
  #5  
Old Fri 19 November 2010, 17:52
Drad98_98
Just call me: Dave #52
 
Fort Ripley, MN
United States of America
Does anyone know which of the board terminals is the 12V output? Mine doesnt match the pics in the manual. Here is my terminal block
Attached Images
File Type: jpg DSC02205.JPG (150.3 KB, 396 views)
Reply With Quote
  #6  
Old Fri 19 November 2010, 18:52
bradm
Just call me: Brad #10
 
Somerville(MA)
United States of America
It doesn't appear that it has one! Unless it's on those two blanked out connectors.

10V should be +10V though (relative to ACM)
Reply With Quote
  #7  
Old Sat 20 November 2010, 13:11
Drad98_98
Just call me: Dave #52
 
Fort Ripley, MN
United States of America
Thanks Brad, Yes I figured it out, 10V is 10 volts reletive to ACM, that was my problem until I realized it is opto-isolated.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Chinese Manufacturers and Paypal qroger Motors & their mountings 11 Tue 19 October 2010 08:03
Andeli inverter english translation manual DenisCasserly 701. Motor Drives 0 Fri 24 September 2010 18:35
Unigraphics manual isladelobos Graphics & CAD 2 Wed 01 April 2009 17:28
Creating a "manual" to describe the MechMate build process Gerald D Archives 5 Thu 05 June 2008 18:09
Chinese spindles? WTI 50. Toolheads 3 Mon 03 December 2007 21:02


All times are GMT -6. The time now is 22:04.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.