MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Electrical & Electronic > 701. Motor Drives
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Mon 14 June 2010, 06:56
helow
Just call me: asad
 
fsd
Anguilla
running stepper motor with printer data pcb board

hi

i have got a stepper motor(i think it is 12V) from a laser printer. I am thinking to run it through large floppy drive (about 5"), but i think it could not run it with full power. thats why i want to use printer's data pcb board to run it. but i need some guide about pins of data and power connector. plz may you help me.

Thanks in advance


Asad
Reply With Quote
  #2  
Old Mon 14 June 2010, 07:30
bradm
Just call me: Brad #10
 
Somerville(MA)
United States of America
Asad, this forum concentrates primarily on constructing MechMate CNC routers, and MechMates are not generally built from those types of parts.

I suggest that you ask the question elsewhere. Unfortunately, the type of information you are requesting is generally proprietary to the manufacturers, and may not be readily available. If there are any part numbers on the motor, you might try googling on them. The printer's pcb board is probably not reusable.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Running 5 drives off one PMDX-122 board J.R. Hatcher 70. Control Systems 40 Tue 19 December 2017 11:21
True Torque of a Servo motor for comparison to a Stepper motor, when used in a router Mcyoda Motors & their mountings 3 Tue 19 August 2008 01:50
What does a stepper motor look like inside? (geared Oriental Motor) Gerald D Motors & their mountings 0 Sat 16 August 2008 09:29
K4- Bipolar Stepper Controller Board javeria The Market Place 0 Tue 29 January 2008 19:26
What mode are u running your motor - Unipolar Bipolar eloid Archives 3 Thu 22 March 2007 22:23


All times are GMT -6. The time now is 02:59.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.