#1
|
|||
|
|||
How to figure A- and A+
I know how to figure out the pairing of wires. A and B. My question is does it matter which pair you designate and A or B and does it matter which one is the negative of the pair and which is the positive. Very confused.
|
#2
|
|||
|
|||
If you are talking of motor coil wires, nothing matters, either way. The worst that can happen (50% chance) is that the motor turns the wrong direction. Then you swop one pair around (+ & -) and it comes right.
|
#3
|
|||
|
|||
That happend today when I re-wired the new drives. Thought I had a faulty drive or a bad connection as the X-axis did not work at first. Found out I did not swop the one coil to reverse direction on the one x-axis stepper.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stepper motor wire colours do not match supplier's info - how to figure them out | hennie | Motors & their mountings | 19 | Sun 14 September 2008 06:41 |