MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Electrical & Electronic > 70. Control Systems
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Tue 15 December 2020, 20:38
SEIKI
Just call me: MARK
 
TROY MI.
United States of America
Mounting mechanical limit/home switches

Is anyone willing to share photos of how they mounted mechanical switches.
Reply With Quote
  #2  
Old Wed 23 December 2020, 11:50
rischoof
Just call me: Rik #92
 
Goirle
Netherlands
Hello mark,
I think you mean the proximity switches for homing and limiting. If you check my post in "mechmates already cutting" from rischoof (its the upper one) I posted at 23 januari 2012 some detailed pictures how they are mounted. the height they are installed depending of the specific sensing distance from you chosen sensor. (in my case 4 mm sensing distance) so I installed the 2 mm above the target. then I have enough clearance to avoid collision.
Reply With Quote
  #3  
Old Thu 24 December 2020, 16:25
SEIKI
Just call me: MARK
 
TROY MI.
United States of America
Thanks for your reply, I'll check it out.
Reply With Quote
  #4  
Old Tue 29 December 2020, 04:27
rischoof
Just call me: Rik #92
 
Goirle
Netherlands
Hello mark,
Did you found the information?
The proximity switches have fine size of threadM8*1 or M12*1.
They get delivered with two nuts. So you have to drill the hole 8 or 12 mm and use the two nuts to clamp the sensor. By this way of installing the height of the sensor can be easily adjusted
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Limit Switches - optical / mechanical / proximity Gerald_D 70. Control Systems 333 Sun 24 January 2016 15:32
Using limit/home switches to autosquare the gantry Alan_c 70. Control Systems 64 Mon 28 February 2011 09:37
Home switches? giggler 70. Control Systems 4 Sun 26 September 2010 17:17
Limit / Home switches - Mechanical or Proxy? fabrica 70. Control Systems 44 Thu 21 June 2007 01:07
What's the difference between Home and Limit switches? Marc Shlaes 70. Control Systems 6 Tue 19 June 2007 07:46


All times are GMT -6. The time now is 09:03.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.