MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Common Assemblies & Parts > Driving Mechanisms: Rack/pinion, gears, screws, belts & chains
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Mon 04 October 2010, 21:36
DTGuitars
Just call me: David
 
Rogersville
United States of America
Source for timing pulleys

Hey guys, I just got my MotionKing steppers in today, and was trying to find a reasonable source for pulleys to build my belt reduction. The MK motors have a 14mm shaft. I want to go either 3:1 or 4:1 on reduction (still debating). After searching for some time (all afternoon), I have struck out in finding 14mm bore timing pulleys. Any suggestions for a US source for these critters?
Reply With Quote
  #2  
Old Tue 05 October 2010, 02:19
jwt
Just call me: John
 
Wexford
Ireland
I gave up too and ended up using 10mm i/d pulleys and resigning myself to drilling them out.

John
Reply With Quote
  #3  
Old Tue 05 October 2010, 03:19
danilom
Just call me: Danilo #64
 
Novi Sad
Serbia
I used 15 tooth XL and bore it for 14mm shaft, my motor had a keyway so I made a passage in pulley 2.5mm for the key on the mill also. and it did not break.
It works ok.
Reply With Quote
  #4  
Old Tue 05 October 2010, 06:05
MetalHead
Just call me: Mike
 
Columbiana AL
United States of America
Check out this site

https://sdp-si.com/eStore/

Takes some digin around but here are some numbers ( for 4:1 belt drive). They will get you started.

the 72 tooth pulley is part number A6A3-72NF03716
the 18 tooth pulley is part number A6A3-18H3716
the belt is a 200xl with Kevlar reinforcement part number A6B3-080037
Reply With Quote
  #5  
Old Tue 05 October 2010, 07:39
DTGuitars
Just call me: David
 
Rogersville
United States of America
Thanks guys, it looks like I'll follow suit and bore the hole out to fit.

Mike, I appreciate the link and part #'s. I looked on thier site yesterday, but didn't see any 14mm bores, so I didn't pursue things very deeply. I'll order these this week, and get my reductions built.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
BeagleBoard- Open Source Hardware KenC 80. Computer Hardware & Software 8 Thu 08 July 2010 20:18
Desperate for a new tape source iqchallenged Golden Resources 3 Sun 21 March 2010 11:34
Toothed, Timing Belt Suppliers Victorian Signs Driving Mechanisms: Rack/pinion, gears, screws, belts & chains 5 Sun 16 August 2009 00:03
Indexer Tailstock and Headstock Source sailfl 50. Toolheads 22 Mon 12 January 2009 07:33
Timing pulleys made easy stcnc The Market Place 0 Mon 08 September 2008 15:02


All times are GMT -6. The time now is 03:48.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.