MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Electrical & Electronic > 701. Motor Drives
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Wed 07 October 2009, 19:53
kanankeban
Just call me: Hector #89
 
Monterrey
Mexico
PMDX-122 & Geckos 203V Diagram ???

Hello,

Im done with the power supply, isolator, main contactor, contactor for router & dust collector and PMDX has power , but I have some doubts on the
PMDX-122 & Geckos 203V besides how to power up the geckos from the power supply. Could some one please point me out to a thread that has a proper PMDX-122 & Geckos 203V conexion diagram to compare it to my diagram...
Reply With Quote
  #2  
Old Wed 07 October 2009, 23:00
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
http://www.mechmate.com/forums/showt...07&postcount=2
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Running 5 drives off one PMDX-122 board J.R. Hatcher 70. Control Systems 40 Tue 19 December 2017 10:21
PMDX-132 instead of the PMDX-122 SteveWellman999 70. Control Systems 23 Mon 02 November 2009 11:47
PMDX-122 power supply paul60 702. Power Supplies 1 Thu 10 September 2009 12:51
"Gecko 540" vs. "PMDX-122 & Geckos 203V" kanankeban 701. Motor Drives 10 Thu 19 February 2009 08:19
PMDX-122 relay output voltage? chopper 70. Control Systems 10 Thu 04 December 2008 07:00


All times are GMT -6. The time now is 02:44.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.