MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > After Building the Beast - Operating , Troubleshooting and Maintenance > Cutting various materials - bit selection, feeds, speeds
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Mon 18 June 2012, 11:09
danilom
Just call me: Danilo #64
 
Novi Sad
Serbia
raw Particle board cutting

I need to cut a lot of 19mm Particle board, its raw, without melamine top.
Really its just packaging grade of board. Order is to cut about 20-30 sheets/month. There is around 35 pieces on one board so its a lot of cut path.

Anyone has in mind some router bit to use? Edge quality is of no concern as it will be covered with fabric later. I need something rough that will just rip it apart
had this in mind:
http://www.cmtutensili.com/show_items.asp?pars=RC~196~2 around 35eur for 8mm , think that it will be strong enough to cut it in one pass.
Reply With Quote
  #2  
Old Mon 18 June 2012, 20:04
digger
Just call me: Milosh #113
 
Toronto
Canada
You may try with compression bit.
Reply With Quote
  #3  
Old Tue 19 June 2012, 01:02
sailfl
Just call me: Nils #12
 
Winter Park, FL
United States of America
Compression bits are working for me when I have to cut sheet material.
Reply With Quote
  #4  
Old Tue 19 June 2012, 02:23
danilom
Just call me: Danilo #64
 
Novi Sad
Serbia
digger:
samo ti zezaj

I said its a low grade particle board with lot of impurities, and edge does not have to be perfect or good.
So that is why I have not considered compression bit (price difference).
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
What to use to cut Melamine Board? Daya Cutting various materials - bit selection, feeds, speeds 17 Tue 13 March 2012 22:08
Control Board Help Please paul60 70. Control Systems 8 Wed 07 October 2009 22:52
What is the purpose of a spoil board or bleeder board? j_wizard 10. Base Table 1 Sun 09 August 2009 17:00
Cutting Foam Core Board jhiggins7 Cutting various materials - bit selection, feeds, speeds 3 Fri 17 April 2009 13:26
cnc4pc board help smreish 70. Control Systems 1 Wed 23 April 2008 05:22


All times are GMT -6. The time now is 17:31.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.