MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Personal Build Histories > Introduce yourself and start planning
Register Options Profile Last 1 | 3 | 7 Days Today's Posts

Reply
 
Thread Tools
  #1  
Old Mon 19 April 2010, 01:18
Planedriver
Just call me: Rob
 
Fairlands
South Africa
Just starting, from Fairland in Johanesburg

Hi All,

I've been studying the plans and getting excited. Lost my job a week ago and now have a lot of time on my hands so here we go. Thanks to all the guys that have already given me advice. I will keep everyone updated.

By the way if anyone needs a pilot let me know.

Rob
Reply With Quote
  #2  
Old Mon 19 April 2010, 03:02
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
Just shout, I am always available to show you around. Sorry to hear about the job loss.
Reply With Quote
  #3  
Old Mon 19 April 2010, 04:40
AuS MaDDoG
Just call me: Tony #71
 
Brisbane
Australia
Welcome Rob!! and good luck with your build, your in good hands here, let me tell you!!

Cheers
Tony.
Reply With Quote
  #4  
Old Mon 19 April 2010, 06:04
domino11
Just call me: Heath
 
Cornwall, Ontario
Canada
Welcome Rob!
Reply With Quote
  #5  
Old Mon 19 April 2010, 20:09
KenC
Just call me: Ken
 
Klang
Malaysia
Welcome Rob! Loosing the driver job could be a blessing in disguise
Reply With Quote
  #6  
Old Tue 20 April 2010, 12:16
Planedriver
Just call me: Rob
 
Fairlands
South Africa
Yeah loosing the job gives me a lot of time to do what I've been meaning to do for a long time.

Doesn't seem like anyone is flying anyway!! hehe
Reply With Quote
  #7  
Old Tue 20 April 2010, 22:23
hennie
Just call me: Hennie #23
 
Roodepoort JHB
South Africa
Rob ,like they say change is as good as a holiday.Gives one some other perspective on life.
Reply With Quote
  #8  
Old Wed 21 April 2010, 01:01
Planedriver
Just call me: Rob
 
Fairlands
South Africa
So true Hennie.

I must say I feel there is a huge burden that has been lifted. Like a divorce its been going on for a long time and now its final.
Reply With Quote
  #9  
Old Wed 21 April 2010, 01:09
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
Flying, too much ash in the air.
Reply With Quote
  #10  
Old Thu 22 April 2010, 00:37
Planedriver
Just call me: Rob
 
Fairlands
South Africa
Hi Kobus,

Its been a while since I was in Brakpan. I used to fly at Brakpan and do some work on planes there.

Rob
Reply With Quote
  #11  
Old Thu 22 April 2010, 01:54
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
Can't fly there one Sunday per month then it is a proper DRAG STRIP for the local MANNE. .... those Brakpan okes with the orange on the arial....fur on the dash...square dice on the rear view mirror..and the Blue Bull balls hanging on the back of the car..
Reply With Quote
  #12  
Old Thu 22 April 2010, 13:21
Planedriver
Just call me: Rob
 
Fairlands
South Africa
Sounds like things got better since last I was there
Reply With Quote
  #13  
Old Fri 23 April 2010, 07:58
rceja
Just call me: rceja
 
jalisco
Mexico
Send a message via MSN to rceja Send a message via Skype™ to rceja
Hi All
I am still lost in this world of drawings, but I am sure I will receive the kindly support from this comunity.
I will retire very soon from the "Universidad de Guadalajara" (I am in the computer sciences area) and will have the time to build my own machine.
I am on my way!!!!

Gretting from Mexico!!.
Rafael Ceja
Reply With Quote
  #14  
Old Fri 23 April 2010, 13:57
Planedriver
Just call me: Rob
 
Fairlands
South Africa
Welcome Rafael.

I've just started myself. let me know how it goes?

Rob
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Today's Posts


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
starting to build this week mrghm Introduce yourself and start planning 8 Mon 06 December 2010 16:35
starting again after a power loss javeria CNC motion control software 21 Mon 20 July 2009 19:51
Starting - Perth, Australia rhoads56 Construction started, but not cutting yet 10 Sun 28 September 2008 05:13
Starting parts list Arthur Ransom Archives 2 Sat 20 January 2007 09:32


All times are GMT -6. The time now is 00:34.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.