MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Common Assemblies & Parts > Motors & their mountings
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Wed 02 January 2013, 08:36
BILL F
Just call me: bill
 
broken arrow, oklahoma
United States of America
Motors

How well will the motor be with a G540?
3.3 N·m, 86 mm (470 oz·in, NEMA 34) Stepper Motor
motor

Holding Torque (Series Wiring) 3.3 N·m (470 oz·in)
Amps/Phase (Series Wiring) 3.0 A
Resistance 0.8 Ω
Inductance 3.5 mH
Rotor Inertia 1400 g·cm²
Length 80 mm
Weight 2.3Kg
Leads/Wires (Color Coded) 8
Shaft Type 12.7 mm, Flat

Step Angle 1.8 °
Stepping Accuracy 5%
Temperature Rise 80 °C Max
Ambient Temperature -20 °C to +50 °C
Insulation Resistance 100 MΩMin 500 VDC
Dielectric Strength 500 VAC 1 Minute
Maximum Radial Load 0.06 mm (450 g)
Maximum Thrust Load 0.08 mm
Reply With Quote
  #2  
Old Wed 02 January 2013, 08:44
bradm
Just call me: Brad #10
 
Somerville(MA)
United States of America
Looks like a very good match.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Stepper motors giving trouble - Motors burnt while serving as ground for elec. fault Daya Troubleshooting 45 Mon 21 April 2008 01:05


All times are GMT -6. The time now is 11:44.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.