MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Personal Build Histories > Introduce yourself and start planning
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Fri 28 May 2010, 14:52
Hedi Shaba
Just call me: hedi
 
tunis
Tunisia
Hello, A mechmate future TUNISIA

Hello
am Tunisian and I will soon build a mechmate Tunis
First of all I thank you for sharing all this information
I intend to build a machine for wood
I ask your opinion on this hardware configuration

http://www.slidesandballscrews.com/2m880n-microstepping-driver-p-303.html?cPath=44_97[/URL]

http://www.slidesandballscrews.com/s...ml?cPath=45_82

http://www.slidesandballscrews.com/p....html?cPath=54

http://www.slidesandballscrews.com/p....html?cPath=46

I'm sorry, my English is very bad, use the google translation
Reply With Quote
  #2  
Old Fri 28 May 2010, 23:12
MetalHead
Just call me: Mike
 
Columbiana AL
United States of America
Welcome !!!!
Reply With Quote
  #3  
Old Sat 29 May 2010, 01:41
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Hi Hedi, your choice looks like this:

Motors:
SY85STH118-6004
Current (phase) 6 Amp
Inductance (phase) 6.5 mH
Length 118mm

Drives:
2M880N
8A current rating
24-70V DC supply
Autotune function for improved smoothness and performance.
Over-voltage, under-voltage, short circuit, overheat protection.

Power Supply:
PS705:
75V DC at 0A & 68V DC at 5A
340W (Continuous) = 340 VA

Parallel Break Out Board:
PCPPS-2


Those motors need quite lot of current and one power supply will not drive all 4 of them together.
Reply With Quote
  #4  
Old Sat 29 May 2010, 09:09
Hedi Shaba
Just call me: hedi
 
tunis
Tunisia
Quote:
Originally Posted by Gerald D View Post
Hi Hedi, your choice looks like this:

Motors:
SY85STH118-6004
Current (phase) 6 Amp
Inductance (phase) 6.5 mH
Length 118mm

Drives:
2M880N
8A current rating
24-70V DC supply
Autotune function for improved smoothness and performance.
Over-voltage, under-voltage, short circuit, overheat protection.

Power Supply:
PS705:
75V DC at 0A & 68V DC at 5A
340W (Continuous) = 340 VA

Parallel Break Out Board:
PCPPS-2


Those motors need quite lot of current and one power supply will not drive all 4 of them together.
hello Gerald
thank you very much to answer me quickly
Food I must have 2 (PS705)

but your opinion is good or not configuaration
because I need a supplier in London is my brother that I'll bring in Tunisia

SVP is what you have an address in London where I found the right configuration for my future Mechmate

thank you very much
Reply With Quote
  #5  
Old Sun 30 May 2010, 14:50
fawzikach
Just call me: Fabricio Wzikach
 
Madrid
Spain
Salut Hedi bienvenue !
Reply With Quote
  #6  
Old Tue 01 June 2010, 04:16
Hedi Shaba
Just call me: hedi
 
tunis
Tunisia
hello Gerald
I'm still waiting your reply about the hardware configuration to make my future mechmate

thank you very much
Reply With Quote
  #7  
Old Wed 02 June 2010, 15:10
Hedi Shaba
Just call me: hedi
 
tunis
Tunisia
Quote:
Originally Posted by fawzikach View Post
Salut Hedi bienvenue !
salut FAWZI merci
contant de vous connaitre
de quel pays vous ete
Reply With Quote
  #8  
Old Wed 02 June 2010, 15:11
Hedi Shaba
Just call me: hedi
 
tunis
Tunisia
Quote:
Originally Posted by MetalHead View Post
Welcome !!!!
thank you
Reply With Quote
  #9  
Old Wed 02 June 2010, 20:39
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Quote:
Originally Posted by Hedi Shaba View Post
hello Gerald
I'm still waiting your reply about the hardware configuration to make my future mechmate

thank you very much
See: Drawing Plan files for downloading - this is where you get the drawings
Reply With Quote
  #10  
Old Fri 04 June 2010, 04:49
Hedi Shaba
Just call me: hedi
 
tunis
Tunisia
hello Gerald
thank you very much for answering me
so I understand your message that I must
* 4 engines SY85STH80 NEMA 34
* 4 drievers 2M880N
* 2 power supplies PS 705
* 1 Breakout PCPPS2

but you think this electronic kit is good for making a Mechmate
I need your opinion please

thank you very much
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
hello, a future mechmate in france (tarn) athanase81 Introduce yourself and start planning 8 Wed 03 July 2013 12:43
Dreaming a future mechmate isladelobos Miscellaneous / General / Whatever / Catchall 6 Sat 20 December 2008 05:34
The hardware interface between PC and motor drives - the future beyond parallel BOB? Gerald D 70. Control Systems 16 Mon 10 December 2007 11:09


All times are GMT -6. The time now is 04:25.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.