MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Personal Build Histories > MechMates already cutting
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Mon 12 December 2022, 09:14
firechief
Just call me: Tim
 
Battle Creek
United States of America
Machmate Upgrade made

I have upgraded my machmate with new clearpath servos, and changed my software over to Acorn from centroid. This move has been the best move I made. It just works.. I will not go back to the old system mach 4, pmdx board, stepper driver and so no. We also build a Machmate with a plasma system on it. It has the same acorn system as my router.

If anyone would like more info please let me know.
Reply With Quote
  #2  
Old Sun 22 January 2023, 15:18
Tim Berframe
Just call me: Tim
 
Alberta
Canada
I would like to know more.

Ive been waffling between DMM servos and Clearpath. Going to use Acorn.

Im just starting to gather steel and tools to start after reading here for over a year.

What motors and gear reduction have you used?
Reply With Quote
  #3  
Old Thu 23 February 2023, 23:47
WilliamT
Just call me: BillT #111
 
Georgetown, TX
United States of America
Clearpath approval

firechief

Id like to chime in and express my approval for Clearpath servos.

Ive been using them on Mechmate 111 for many years now and could not be happier. They are Nema 23s and they push that big gantry around effortlessly. YES, NEMA 23s

I keep two dial indicators attached to the machine to check for overshoot/undershoot, when the gantry returns. It always comes back to the Zero position. Sometimes on a long tool path run, 45 minutes or so, it will return with a little error; generally less that .0005 each axis. Im happy with that

The Clearpath servos on my Mechmate, the Clearpath servos on my 3-axis Bridgeport conversion, and the Clearpath HP servo on the Bridgeport spindle have never failed. They are more expensive that steppers, but since their failure rate is ZERO, I never have to trouble shoot control problems.

I also have an Acorn controller on the shelf, but waiting for time to complete the upgrade. Cant wait..

For those interested in the Clearpath or other servos, if you can afford it, get away from the hobby controls-stuff. Youll never regret it.



BillT
Reply With Quote
  #4  
Old Fri 25 August 2023, 22:49
YANLM
Just call me: Yannick #129
 
ST DENIS
Reunion
hi Tim! i m interrested to know more about your upgraded mechmate.

Yannick.
Reply With Quote
  #5  
Old Fri 01 September 2023, 20:53
juanes
Just call me: joh
 
Stago.
Chile
Estimado le agradeceria a usted publicar fotos de mechmate Plasma
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Time for an Upgrade! #79 - Calgary Canada HomeMadeCnc MechMates already cutting 174 Mon 15 May 2017 17:55
Upgrade Pictures sailfl Archives 2 Sun 08 February 2009 07:54
Required Torque for possible upgrade ?? boutzo869 Archives 4 Wed 22 October 2008 09:04
MachMate - Krasnodar, Russia Maxkor1973 Construction started, but not cutting yet 1 Sat 14 June 2008 18:48


All times are GMT -6. The time now is 01:48.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.