MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Miscellaneous hardware and software > Miscellaneous / General / Whatever / Catchall
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Tue 05 September 2017, 05:05
silverdog
Just call me: Sergio #70
 
Rome
Italy
Steel cutting at high speed

https://www.youtube.com/watch?v=i61c...A&pbjreload=10


Since Mechmate is a stronger shopbot ... :-)

give a look at this CAM too :-)
https://github.com/fellesverkstedet/...tric-toolpaths
Reply With Quote
  #2  
Old Thu 21 September 2017, 18:59
dbinokc
Just call me: DB #118
 
Oklahoma
United States of America
From the video and some other references, it looks like the use of Trochoidal milling is the real technique. I have will defintely have to do a little more research on that and maybe give it a try.
Reply With Quote
  #3  
Old Fri 22 September 2017, 06:12
silverdog
Just call me: Sergio #70
 
Rome
Italy
I think it's an alchemy of the right elements and right mesure.
Trochoidal milling is the fundamental elemet, but you need the right chip load, the right ramp cutting .... I still need to study :-)
Reply With Quote
  #4  
Old Fri 22 September 2017, 07:37
Dumitru Ivanov
Just call me: Muresului 9
 
Cluj-Napoca
Romania
Quote:
Originally Posted by dbinokc View Post
From the video and some other references, it looks like the use of Trochoidal milling is the real technique. I have will defintely have to do a little more research on that and maybe give it a try.
Same here. I was unaware of it up to this point.
Reply With Quote
  #5  
Old Fri 22 September 2017, 14:10
Macwood
Just call me: Mac
 
London
United Kingdom
I just found this

https://www.youtube.com/watch?v=S-DB2Vmr0qw

Has some interesting info on this type of milling.
Reply With Quote
  #6  
Old Sun 24 September 2017, 05:02
silverdog
Just call me: Sergio #70
 
Rome
Italy
https://www.youtube.com/watch?time_c...&v=ORJ-Q3TFW5o
and this with ESTLCAM that has a very acreactive price and the trochoidal strategies
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Max. speed of the MechMate - moving, cutting, jogging . . . . sprayhead General - MM Build 31 Fri 19 February 2010 06:28
Cutting speed becomes irregular - computer not matched properly martin77pl Troubleshooting 5 Wed 02 September 2009 12:55
Cutting Stainless Steel Daniel T Cutting various materials - bit selection, feeds, speeds 2 Sun 23 August 2009 00:26
Pre-finished steel rails from Standard Steel Specialty dmoore Rails & Rollers 0 Thu 01 May 2008 17:28
Machine locks up while travelling at high speed - Tuning the motor speeds and accels Doug_Ford Troubleshooting 3 Sun 03 February 2008 22:55


All times are GMT -6. The time now is 08:14.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.